Abstract:This study introduces a multidisciplinary design methodology tailored for enhancing the performance of cooled turbine blades by amalgamating thermal and aerodynamic calculation modules. The approach is unique in terms of its integration of a multi-objective optimization platform, aimed at refining aerodynamic performance and gauging the heat transfer capabilities during the preliminary aerodynamic design phase. To accomplish this objective, a one-dimensional pipe-network calculation tool was incorporated into the thermal module to quickly evaluate the heat transfer performance of the blades under different conditions. This tool also provides more realistic film hole inlet boundary conditions essential for three-dimensional aerodynamic calculations. Implementing this platform in optimizing a high-pressure turbine blade revealed a Pareto-optimal front, comprising −η1 and η2 (representing optimization objectives for aerodynamic and heat transfer performance, respectively), showcasing a constrained relationship. Upon scrutinizing three optimization cases against the prototype, optimization case 1 demonstrates the most significant enhancements in aerodynamic performance, showing a 0.2015% improvement in aerodynamic efficiency relative to the prototype. Conversely, optimization case 3 displays a comparatively modest augmentation in aerodynamic performance but excels notably in heat transfer performance, showcasing a 7.61% reduction in the maximum temperature of the blade surface compared to the prototype. Through adept optimization strategies and meticulous variable selection, we maintained a relatively stable mainstream mass flow across the optimization cases (less than 0.05% variation). These findings underscore the efficacy of our multidisciplinary design approach for cooled turbine blades, promising efficiency improvements in current design practices and potential reductions in project duration.

Intensive riser cooling of a turbine blade steel casting after solidification

Intensive Riser Cooling of Castings after Solidification

The comparison of intensive riser cooling of castings after solidification in three classic metals

Transpiration Cooling of High Pressure Turbine Vane with Optimized Porosity Distribution

Optimization of the Cooling Process of a Heavy Hydraulic Turbine Runner Band Casting in Heat Treatment

Improvement of quality and yield for investment casting of centrifugal pump impeller by tilting mold and optimizing runner/riser system

Stress Analysis and Deformation Prediction of a Heavy Hydraulic Turbine Blade Casting During Casting and Heat Treatment

Cooling Control for Castings by Adopting Skeletal Sand Mold Design

Thermal Stress Analysis of the Solidification Process of Francis Turbine Band Casting

A cooled turbine blade design and optimization method considering the cooling structure influence

Design and Optimization of Casting Technology for Steel Beam

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

The mechanical characteristics and cooling performance of a turbine blade with non-homogeneous lattice structure

Cooling Structure Optimization For A Rib-Roughed Channel In A Turbine Rotor Blade

Stress analysis and deformation prediction of a heavy hydraulic turbine blade casting in heat treatment process

Calculating Methods of Cast Steel Risers' Minimum Safety Height and Volume Ratio of Surplus Molten Steel

Dynamic Secondary Cooling of Continiuous Slab Casting by Incremental PID Control

A conjugate study on the application of combined impingement and film cooling for a turbine blade tip

Through Process Numerical Simulation of a Heavy Hydro Turbine Blade Casting

Improving Microstructural Homogeneity of Investment‐Cast Single‐Crystalline Ni‐Base Superalloys by Employing Fluidized Carbon Bed Cooling

Control of dimensional accuracy of hollow turbine blades during investment casting