Abstract:Considering the inherent advantages of the Light Emitting Diode (LED) in the field of illumination, this work designs an intelligent supplementary lighting system using LED as the light source. Combining microcontroller and electronic circuit theory, the circuit is built with the microcontroller PIC16F873 as the core control chip. The system utilizes an external 220 V AC-20 V DC conversion power supply, hence operating on a 20 V DC power source. The system consists of four hardware parts: the onboard power supply uses TI-produced TPS54331 as the control chip to achieve voltage conversion; the external signals (flashing and burst flashing signals) are isolated from the microcontroller through an optocoupler circuit; the PWM pulses output from the microcontroller’s RC1/CCP2 pins drive the corresponding switching tubes to achieve the flashing function; the flashing synchronization signal is output externally after optocoupler isolation, and its synchronous output with the flashing signal is achieved through an optocoupler after LED conduction; the circuit is established using TI-produced differential bus transceiver SN65LBC184D to convert the external 485 differential signal to the level signal required by the microcontroller. In the experiment, after completing the hardware design, connecting the LED panel, and debugging the test program, it is found that the designed lighting system has a good supplementary lighting effect. According to the PWM output waveform, the flashing effect meets the design expectations. The Hadoop big data computing platform is introduced. Simulation testing reveals that under no backlight conditions, the system achieves an illumination intensity of around 20 klx at a distance of about 10 meters. With backlight conditions, the system maintains an illumination intensity of around 1.5 klx at a distance of about 10 meters. Further calculations are performed to analyze the variation in foot traffic within the test area’s illumination over 24 hours. The total illumination intensity during different time intervals is compiled, confirming that the system can autonomously adjust the illumination intensity of the area based on changes in foot traffic.

Application of Artificial Neural-Network to Control the Light of Multi-Color LED System

The Intelligent Flow Control of LED Phosphor Powder Based on WPA-BPNN-PID Algorithm

Predicting of Luminous Flux for a LED Array Using Artificial Neural Network

An LED Color Control System with Independently Changeable Illuminance

A novel method for illumination and communication using white LED lights

Automatic Monitoring and Controlling LED Energy Saving Lighting System Based on C8051F020 MCU

An Intelligent Control System for LED Headlamp

Intelligent Luminance Control of Lighting Systems Based on Imaging Sensor Feedback

Design and Implementation of a Smart Networking Control System for LED Lighting Based on CAN.

A novel wireless lighting control strategy using RBF neural networks and genetic algorithm

Analyses of multi-color plant-growth light sources in achieving maximum photosynthesis efficiencies with enhanced color qualities

LED Dimming System with Zigbee Network and Driver LM3409HV

Tunable fluorescence emission for multi-color light-emitting diodes and voice-activated intelligent lighting applications

A network control system for scene adaptive semiconductor lighting

Spectrally Tunable LED Lighting System and Its Optimization Algorithm

Intelligent Light Emitting Diode Flashing Supplementary Lighting Control Design and Its Big Data Illumination Analysis

A Wireless Sensor Network Based on the Novel Concept of an I-matrix to Achieve High-Precision Lighting Control

The Design of A Self-Adaptive Illuminance and Color Temperature Adjustable LED Desk Lamp

Coordinated Real-Time Control Algorithm for Multi-Crossing Traffic Lights.

Smart control of electrical power in an LED lighting network taking into account road flow and meteorological conditions

Design Of Led Dimming System With The Specific Target Parameter Control Function