Abstract:Methyl decanoate, methyl-5-decenoate and methyl-9-decenoate have been widely adopted as biodiesel surrogates for engine simulation. However, these surrogates have relatively short chain length and very different physical properties compared with biodiesel molecules. Additionally, it is difficult to distinguish the unsaturafion degree of different biodiesel fuels by using these surrogates. The direct use of the heavy methyl esters in real biodiesel fuels as surrogates is essential to accurately simulate biodiesel fuels. In this work, a four-part scheme to formulate skeletal mechanism for heavy saturated methyl esters has been proposed. Within the scheme, the oxidation mechanism is divided into four parts: low temperature oxidation, high temperature decomposition, ester group reactions and detailed C4-C0 chemistry. A skeletal mechanism for two of the five main methyl esters in real biodiesel fuels, i.e. saturated methyl palmitate and methyl stearate, has been constructed. The obtained skeletal mechanism contains only 6 fuel-dependent species and 13 fuel-dependent reactions for each heavy saturated methyl ester. Extensive validations were performed against shock tube experimental data for ignition delay timing under different initial pressure, temperature and equivalence ratio. The ignition delay behavior at high temperature has been well captured by the developed skeletal mechanism. As for ignition at low to medium temperature (from 650 K to 900 K), there is no experimental data due to the low vapor pressure and high melting point of heavy methyl esters. The comparison of ignition behavior at low temperature has been made between several models. Furthermore, the oxidation of n-decane/methyl palmitate and benzene/methyl stearate in a jet-stirred reactor has been utilized to validate the important species concentration. Good agreements have been observed through the validations. The results indicate that the developed skeletal mechanism is capable of predicting the combustion characteristics of methyl palmitate and methyl stearate.

Experimental Investigations on the Thermophysical Properties of Methyl Myristate in Alcoholic Solutions

Densities and Viscosities of Binary Mixtures of Cyclopropanecarboxylic Acid with Methanol, Ethanol, Propan-1-ol, and Butan-1-ol at Different Temperatures

Experiment Investigation on the Liquid Thermal Conductivity of Biodiesel + Diesel Fuel Blends

Experimental and Modeling Investigations of Density and Viscosity for the Ternary ( N -Octane + Ethylcyclohexane + Ethylbenzene) Mixtures

Experimental and Theoretical Research on Mixtures of 2-Methyl-2-butanol and 1-Alkanol (1-Hexanol to 1-Nonanol)

Experimental and Theoretical Studies of Ethylene Glycol Dimethyl Ether and 2-Alkanol Mixtures

Measurement and Correlation of the Density, Viscosity and Vapor Pressure of Fatty Acid 2-Ethyhexyl Esters

Investigating the Density and Viscosity of 3-Ethyl-3-Pentanol and Short-Chain 1-Alkanol: A Free Volume Theory Approach

Experimental and Modeling Molecular Interactions Between Ethyl Myristate and 2-Alkanol

Skeletal Mechanism Construction for Heavy Saturated Methyl Esters in Real Biodiesel Fuels

Densities and Viscosities for the Ternary Mixture of N-Undecane (1) + Methyl Decanoate (2) + N-Butanol (3) and Corresponding Binaries from T=293.15 to 333.15 K and at Atmospheric Pressure

Analyzing Intermolecular Interactions in 2-Methyl-1-pentanol and C4-C7 1-Alkanol Mixtures: Thermodynamic and Transport Investigations

Densities and Viscosities for the Ternary System of Isopropylcyclohexane (1) + <i>n</i>-Tridecane (2) + <i>n</i>-Butanol (3) and Corresponding Binaries at <i>T</i>=293.15 to 333.15 K

Integrated exploration of intermolecular interactions in 3-methyl-1-butanol and C 5 -C 8 1-alkanol mixtures via density functional theory and experimental approaches

Study on volatility and flash point of the pseudo binary mixtures of sunflower-based biodiesel + methylcyclohexane

Measurements and Correlations of Density, Viscosity, and Vapor Pressure for Methyl Ricinoleate

Volatility of Blended Fuel of Biodiesel and Ethanol

Thermodynamic Insights into 3-Methyl-2-Butanol and C3–C6 1-Alkanol: Experimental Study and CPA Modeling

Experimental and Simulation Insights into the Thermophysical Properties of Dibutyl Ether Mixed with n-Heptane and n-Octane

Experimental Measurements and Modeling of Density and Viscosity for Methyl Caprate + 1-Alkanol at Atmospheric Pressure and Different Temperatures

Influence of temperature, residence time, and solvent/feedstock mass ratio on overall product distribution and oil products quality in ethanol liquefaction of 230 polypropylene impact copolymer