Abstract:High-accuracy servo control of pneumatic systems requires nonlinear model-based control techniques based on full-state knowledge of the system.For the consideration of cost or light-weight design,non-linear pressure observers in place of pressure sensors were constructed to acquire the pressure states in the chambers of the pneumatic cylinder.Firstly,the global stability of the proposed pressure observer was demonstrated based on Lyapunov-stability theory.Secondly,the pressure observer's polytropic exponent was analyzed and determined experimentally.Moreover,to check the fast convergence of the proposed pressure observer,a set of experiments for tracking a 0.5 Hz sinusoidal trajectory were performed under condition that the initial states of both chambers should be pressurized and the initial values of the observed pressures were intentionally set different from the actual values.Furthermore,to verify the load-independent of the presented pressure observer,the valve-controlled pneumatic cylinder system acted upon by a variable-stiffness loading force was adopted to carry out pneumatic servo control.A three-way on-off solenoid value was configured as two-way valve.Thus,four two-way on-off solenoid valves controlled with pulse width modulation (PWM) in lieu of one or two proportional valves were employed to govern the pneumatic cylinder for achieving the pneumatic servo control.Finally,extensive experiments validated the effectiveness and feasibility of the proposed pressure observer for high-accuracy pneumatic servo control of the valve-controlled pneumatic cylinder system.

Nonlinear Compound Control of Pneumatic Servo Loading System

Nonlinear Modeling on Electro Hydraulic Servo System and SSA Control

A Combined Nonlinear Pid Control and Cross-Coupled Pre-Compensation Control in Hydraulic Excavator

Fuzzy control of injection pressure of injection molding machines based on a nonlinear function

Precision Servo Control of GMA Based on Compounding Feedforward Compensation

Nonlinear Control of Long-pipe Valve-controlled Asymmetrical Cylinder System

Nonlinear Supply Pressure Control for a Variable Displacement Axial Piston Pump

Adaptive robust synchronous control of a individual metering dual-cylinder pneumatic system with composite parallel method

Pneumatic Position Servo Embedded Controller and Control Strategy

Globally Stable, Fast Convergent and Load-independent Pressure Observer for Pneumatic Servo Systems

Adaptive Robust Trajectory Tracking Control of a Parallel Manipulator Driven by Pneumatic Cylinders

High Performance Motion Trajectory Tracking Control of Pneumatic Cylinders: A Comparison of Some Nonlinear Control Algorithms

Motion Trajectory Tracking Control of Pneumatic Position Servo Systems

Identification of Characteristic Parameters and Structure Parameters in Pneumatic Servo Control

Adaptive Robust Control of Pneumatic Cylinders Using Fast Switching On/off Solenoid Valves

Research On Pneumatic-Servo Calligraphy Robot

Research on 2-stage Electro-hydraulic Position Servocontrol Based on Heavy Load and Long Working Stroke Position Control System

Research on pneumatic position servo control strategy and DSP controller

Adaptive robust posture control of a parallel manipulator driven by pneumatic muscles

The generalized pulse code modulation pneumatic servo system and its control

Design and Speed Control for Closed-loop Electro-hydraulic Proportional Servo Injection Machine System