Abstract:Background The convectional strain-based algorithm has been widely utilized in clinical practice. It can only provide the information of relative information of tissue stiffness. However, the exact information of tissue stiffness should be valuable for clinical diagnosis and treatment. Methods In this study we propose a reconstruction strategy to recover the mechanical properties of the tissue. After the discrepancies between the biomechanical model and data are modeled as the process noise, and the biomechanical model constraint is transformed into a state space representation the reconstruction of elasticity can be accomplished through one filtering identification process, which is to recursively estimate the material properties and kinematic functions from ultrasound data according to the minimum mean square error (MMSE) criteria. In the implementation of this model-based algorithm, the linear isotropic elasticity is adopted as the biomechanical constraint. The estimation of kinematic functions (i.e., the full displacement and velocity field), and the distribution of Young’s modulus are computed simultaneously through an extended Kalman filter (EKF). Results In the following experiments the accuracy and robustness of this filtering framework is first evaluated on synthetic data in controlled conditions, and the performance of this framework is then evaluated in the real data collected from elastography phantom and patients using the ultrasound system. Quantitative analysis verifies that strain fields estimated by our filtering strategy are more closer to the ground truth. The distribution of Young’s modulus is also well estimated. Further, the effects of measurement noise and process noise have been investigated as well. Conclusions The advantage of this model-based algorithm over the conventional strain-based algorithm is its potential of providing the distribution of elasticity under a proper biomechanical model constraint. We address the model-data discrepancy and measurement noise by introducing process noise and measurement noise in our framework, and then the absolute values of Young’s modulus are estimated through the EFK in the MMSE sense. However, the initial conditions, and the mesh strategy will affect the performance, i.e., the convergence rate, and computational cost, etc.

Strain Estimation of Truss Structures Based on Augmented Kalman Filtering and Modal Expansion

Strain response estimation for the fatigue monitoring of an offshore truss structure

A Method to Predict Structural Dynamic Strain Based on Acceleration Signal

Self-Tuning State Estimation for Adaptive Truss Structures Using Strain Gauges and Camera-Based Position Measurements

Structural Response Estimation Based on Kalman Filtering with Known Frequency Component of External Excitation and Multitype Measurements for Beam-Type Structure

Joint Estimation of Multi-Scale Structural Responses and Unknown Loadings Based on Modal Kalman Filter Without Using Collocated Acceleration Observations

Identification of Time-Varying Stiffness with Unknown Mass Distribution Based on Extended Kalman Filter

Reconstruction of elasticity: a stochastic model-based approach in ultrasound elastography

A Multitype Sensor Placement Method for the Modal Estimation of Structure

Structural damage detection based on Kalman filter and neutral axis location

Non-baseline Method for Damage Detection in Truss Structures Using Displacement and Strain Measurements

Structural Response Reconstruction in Physical Coordinate from Deficient Measurements

Time Domain Strain/Stress Reconstruction Based on Empirical Mode Decomposition: Numerical Study and Experimental Validation

Structural damage identification with unknown external inputs based on the sparse constraint

Improved Force Identification with Augmented Kalman Filter Based on the Sparse Constraint

Strain Virtual Sensing Applied to Industrial Presses for Fatigue Monitoring

Dynamic Strain Field Estimation of Fixed Offshore Support Structures Using Limited Acceleration Measurements

Identification of structural element mass and stiffness changes using partial acceleration responses of chain-like systems under ambient excitations

Deflection Estimation of Truss Structures Using Inverse Finite Element Method

Deformation Reconstruction and Sensor Optimal Layout of Large-Span Spatial Structures Based on the Kalman Filter Method

Damage Detection for Space Truss Structures Based on Strain Mode under Ambient Excitation