Abstract:In this study, poly(lactic acid) (PLA)/starch blends were prepared through reactive melt blending by using PLA and starch as raw materials and vegetable oil polyols, polyethylene glycol (PEG), and citric acid (CA) as additives. The effects of CA and PEG on the toughness of PLA/starch blends were analyzed using a mechanical performance test, scanning electron microscope analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, X-ray diffraction, rheological analysis, and hydrophilicity test. Results showed that the elongation at break and impact strength of the PLA/premixed starch (PSt)/PEG/CA blend were 140.51% and 3.56 kJ·m−2, which were 13.4 and 1.8 times higher than those of pure PLA, respectively. The essence of the improvement in the toughness of the PLA/PSt/PEG/CA blend was the esterification reaction among CA, PEG, and starch. During the melt-blending process, the CA with abundant carboxyl groups reacted in the amorphous region of the starch. The shape and crystal form of the starch did not change, but the surface activity of the starch improved and consequently increased the adhesion between starch and PLA. As a plasticizer for PLA and starch, PEG effectively enhanced the mobility of the molecular chains. After PEG was dispersed, it participated in the esterification reaction of CA and starch at the interface and formed a branched/crosslinked copolymer that was embedded in the interface of PLA and starch. This copolymer further improved the compatibility of the PLA/starch blends. PEGs with small molecules and CA were used as compatibilizers to reduce the effect on PLA biodegradability. The esterification reaction on the starch surface improved the compatibilization and toughness of the PLA/starch blend materials and broadens their application prospects in the fields of medicine and high-fill packaging.

Poly(propylene Carbonate)/starch Blends Prepared by Water-assisted Processing

Structure-property Relationships of Reactively Compatibilized PHB/EVA/starch Blends.

Gelatinized Starch/biodegradable Polyester Blends: Processing, Morphology, and Properties

Preparation and Characterization of Thermoplastic Starch /Poly(butylene-Succinate) Blends

Effect of Addition of Pp-G- (Gma-Co-st) on Morphologies and Properties of Pbt/Pp Blends

Blends of Poly(β-hydroxybutyrate) with Poly(propylene carbonate)

The compatibilization of poly (propylene carbonate)/poly (lactic acid) blends in presence of core-shell starch nanoparticles

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Poly(L-Lactide) Materials with Balanced Mechanical Properties Prepared by Blending with Peg-Mb-Ppa Multiblock Copolymers

Polyethylene-octene Elastomer/starch Blends: Miscibility, Morphology and Mechanical Properties

Effect of Plasticizers on Microstructure, Compatibility and Mechanical Property of Hydroxypropyl Methylcellulose/hydroxypropyl Starch Blends.

Morphology, thermal behavior, and mechanical properties of nylon6/multi-monomer grafted polypropylene blends

Effect of Processing Conditions on Microstructures and Properties of Hydroxypropyl Methylcellulose/hydroxypropyl Starch Blends

Effect of Compatibilizer Distribution on Thermal and Rheological Properties of Gelatinized Starch/Biodegradable Polyesters Blends

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization

Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films

Morphology, thermal behavior, rheological, and mechanical properties of polypropylene/polystyrene blends based on elongation flow

Improved Mechanical and Thermal Properties of Polypropylene Blends Based on Diethanolamine-Plasticized Corn Starch Via in Situ Reactive Compatibilization

Effect of Compatibilizer Distribution on the Blends of Starch/biodegradable Polyesters

Wet blending of pregelatinized starch and poly (butylene succinate)

Relationship Between Morphologies and Mechanical Properties of Hydroxypropyl Methylcellulose/hydroxypropyl Starch Blends.