Abstract:Ultrasonic flowmeters (UFMs) based on the principle of transit time difference are widely used in process industries. The transit time difference is obtained through analyzing received acoustic signals generated by a couple of transducers located upstream and downstream respectively. The quality of received acoustic signal will directly affect the measurement accuracy of UFM. For this reason, a measurement-calculation coupled approach combining measurement tools and numerical simulation for calculating the acoustic signal of UFM is proposed in this paper. The method can predict the acoustic signals of UFM with different flowrates. First, important boundary condition (vibration velocity on transmitter transducer surface) is measured by measurement tool, which can reduce computational complexity and also avoid modeling transmitter transducers. Second, simulating the wave propagation (difficult to access experimentally) within moving medium by using the measured vibration velocity. Third, obtaining the transfer function of receiver by comparing estimated force acting on the receiver transducer surface with measured voltage signal from receiver, which can avoid modeling receiver transducer. Finally, predicting the received acoustic signal at different flowrates by using the transfer function. The rationality of predicted data was validated by comparing experimental and predicted acoustic signal on receiver transducer at different flowrates. A good agreement between simulated and experimental data was obtained, which means that the working processes of the acoustic signal generated by actual transducers inside UFMs can be accurately predicted based on this method. Analysis of the predicted results will provide good guides and advices to the design of UFMs involving actual application.

Ultrasonic Phased Array for Sound Drift Compensation in Gas Flow Metering

Multipath Flow Metering of High-Velocity Gas Using Ultrasonic Phased-Arrays

A Model-Based Transit-Time Ultrasonic Gas Flowrate Measurement Method

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Optical Measurement System for Two-Phase Flow in Horizontal Small Tube Based on Photodiode Arrays

Realization of a Multipath Ultrasonic Gas Flowmeter Based on Transit-Time Technique.

Algorithm to Correct Measurement Offsets Introduced by Inactive Elements of Transducer Arrays in Ultrasonic Flow Metering

A New Type Of Ultrasonic Gas Flowmeter With Multi-Tracks

Psychosocial adjustment 17 years after severe brain injury

A Gas Flow Measurement System Based on Lead Zirconate Titanate Piezoelectric Micromachined Ultrasonic Transducer

A Fault-Tolerant Flow Measuring Method Based on PSO-SVM with Transit-Time Multipath Ultrasonic Gas Flowmeters

Multipath Ultrasonic Gas Flow-Meter Based on Multiple Reference Waves

Numerical Analysis of Transducer Installation Effect on Ultrasonic Gas Flow Meter

Design of ultrasonic flowmeter for wet gas measurement

Data Integration for Multi-Path Ultrasonic Flowmeter Based on Levenberg–Marquardt Algorithm

Gas Flow-Rate Measurement Using a Transit-Time Multi-Path Ultrasonic Flow Meter Based on PSO-SVM.

A new method for researching the acoustic field of a gas ultrasonic flowmeter based on a Gaussian beam

A Model-Based Hybrid Ultrasonic Gas Flowmeter

A High Accuracy Transit-Time Airflow Volumetric Flowmeter Based on Pmuts Arrays

Cfd Aided Investigation of Multipath Ultrasonic Gas Flow Meter Performance under Complex Flow Profile

Highly Accurate Airflow Volumetric Flowmeters Via Pmuts Arrays Based on Transit Time