Abstract:As the voltage driver of megavolt power supply in Dynamitron accelerator, RF oscillator largely determines the whole system performance. A solid-state RF oscillator scheme with four elements resonant network in CLLC configuration was proposed in this article. By analyzing the operation principle of this CLLC resonant topology, three operation modes and the optimization target of resonant network parameters were discussed. The equivalent circuit model of resonant tank was built with taking the transformer parameter into account. In order to achieve optimal design, the impacts of resonant parameters on the system performance were investigated. The results indicate that larger secondary capacitance can improve system performance but may bring undesirable harmonic issue. Increasing inductance ratio of transformer would bring higher voltage output while lowering the power capability. Then, a parameter optimization method is proposed to achieve a high output voltage, while keeping the power loss and resonant current low. The feasible zone under given set of resonant parameters was determined. Finally, a prototype of RF oscillator applied in Dynamitron accelerator was developed, with a voltage of similar to 79 kV and a frequency of similar to 100 kHz. The influences of resonant parameters on the system performance were also verified through experiments.

Study on the Stability and Reliability of Clinotron at Y-band

Mode Analysis and Design of 0.3-Thz Clinotron

Prime Study On Dispersion Of 0.3thz Clinotron

A Continuous-Wave Clinotron at 0.26 Thz with Sheet Electron Beam

Theoretical Studies on Stability and Feasibility of 0.34 THz EIK

Effects of Tolerance in Fabrication on Extended Interaction Klystron at 0.34 THz

Stability Study of A Gyrotron-Traveling-Wave Amplifier Based on A Lossy Dielectric-Loaded Mode-Selective Circuit

Dual-frequency Low-Voltage Subterahertz Radial Clinotron Based on Fan-Shaped Splitter

Feasibility Study of a THz Sheet Beam Extended Interaction Oscillator

Tolerance Study of Travelling-Wave Accelerating Structure for the Main Linac of the Klystron-Based First Stage of Compact Linear Collider

Amplifier test stand for the CRM cyclotron

Stability Analysis of C-band 500-kW Klystron with Multi-cell Output cavity

Improving the Stability of Pulse Superconducting Radio Frequency Cavities by the Construction of an Al-Nb Double Layer Structure

Radiation Output of the 330 GHz Continuous-Wave Clinotron Oscillator With Modified Cavity

Improvement for an S-Band Broadband Klystron

Influence of Α- and Β-W Phases on Performance of SMR Devices

Test Stand Design And Construction For High Intensity Cyclotron Developement

Development of High-Power S-band Load

Optimum Design and Measurement Analysisof 0.34 THz Extended Interaction Klystron

A Solid-State High-Voltage RF Oscillator with CLLC-type Resonant Topology and Its Parameter Optimization

Development of Tsinghua X-Band High Power Test Facility