Abstract:A strategic option for the production of H2 from renewable resources is use of the ethanol steam reforming reaction. Catalysts based on nickel have been widely investigated for this reaction, offering the advantages of low cost and high activity. However, a difficulty is that nickel may be strongly deactivated by coke formation. Perovskite-type mixed oxides are promising precursors for nickel-based catalysts, since their reduction leads to the formation of highly dispersed metal particles that can mitigate carbon deposition. However, high calcination temperatures are required for perovskite structure formation, resulting in low surface areas and limiting the effectiveness of this method. In order to address this difficulty, the present work proposes a novel strategy whereby the perovskite-type oxide LaNiO3 is supported on SBA-15. Characterization of the catalysts was performed using XRF, XRD, SEM, TPR, TEM, BET, H2-TPD, and TGA techniques. Their performances were then evaluated in catalysis of the ethanol steam reforming reaction to produce hydrogen. Calcination at 750 °C resulted in formation of highly dispersed perovskite on a support that presented high specific surface area. The catalyst obtained from reduced LaNiO3/SBA-15 with 33 wt% perovskite was the most active in the reaction. Analyses using TGA and SEM showed the formation of carbon mainly over Ni catalysts obtained from bulk LaNiO3 perovskite, while supporting LaNiO3 on SBA-15 led to lower deposition of carbon. The superior performance of this material in catalysis could be attributed to the dispersion of the perovskite on SBA-15, resulting in smaller size of the Ni metal particles formed during the reduction, compared to the catalyst derived from bulk perovskite. This promising method could be used in the production of a wide range of other catalysts.

Effects of Preparation Technique and Lanthana Doping on Ni/La2O3-ZrO2 Catalysts for Hydrogen Production by CO2 Reforming of Coke Oven Gas

Studies on nickel-based catalysts for carbon dioxide reforming of methane

Effect Of Lanthanum On Zr-Co/Gamma-Al2o3 Catalysts For Fischer-Tropsch Synthesis

Effect of La_2O_3 on Ni/γ-Al_2O_3 Catalyst for Biogas Reforming to Hydrogen

Enhancement of CO2 Methanation over La-Modified Ni/SBA-15 Catalysts Prepared by Different Doping Methods

Catalytic Performance and Characterization of Ni–CaO–ZrO2 Catalysts for Dry Reforming of Methane

The Effect Of Lanthana On Catalytic Performance Of La-Modified Cu/Zro2 Catalysts For Co Hydrogenation

Lanthanum-mediated enhancement of nickel nanoparticles for efficient CO 2 methanation

Effects of Noble Metals Doped on Mesoporous Laalni Mixed Oxide Catalyst and Identification of Carbon Deposit for Reforming Ch4 with Co2

Effects of Preparation Method on the Performance of Ni/Al 2 O 3 Catalysts for Hydrogen Production by Bio-Oil Steam Reforming

Effects of Promoters and Preparation Procedures on Reforming of Methane with Carbon Dioxide over Ni/Al2O3 Catalyst

Doping low amount of Zirconium in Rh-LTO to prepare durable catalysts for dry reforming of methane

Hydrogen production by CO2 reforming of CH4 in coke oven gas over Ni–Co/MgAl2O4 catalysts

Promotion effect of different lanthanide doping on Co/Al2O3 catalyst for dry reforming of methane

Customized Ni–MgO–Al2O3 catalyst for carbon dioxide reforming of coke oven gas: Optimization of preparation method and co-precipitation pH

Improving Coking Resistance and Catalytic Performance of Ni Catalyst from LaNiO3 Perovskite by Dispersion on SBA-15 Mesoporous Silica for Hydrogen Production by Steam Reforming of Ethanol

Effect of Preparation Method on the Performance of Cu‐Mn‐(La)‐Zr Catalysts for CO2 Hydrogenation to Methanol

EFFECT OF LA2O3 ON THE CATALYTIC PERFORMANCE AND PROPERTIES OF CU/ZNO CATALYST FOR HYDROGENATION OF CO2

Synthesis of nickel catalysts supported on Zr-doped ordered mesoporous Al2O3 and their catalytic performance for low-temperature CO2 reforming of CH4

Phase Transformation of Zr-Modified LaNiO3 Perovskite Materials: Effect of CO2 Reforming of Methane to Syngas

Studies on CuO/La_2O_3-ZrO_2 Catalyst for Production of Hydrogen by Ethanol Steam Reforming