Abstract:Multi-wavelength temperature measurement technology is an advanced radiation temperature measurement technology, which assumes a functional relationship between emissivity and spectrum. The measured multi-wavelength radiation signals and the function relationship between emissivity and spectral is used to obtain the true temperature and emissivity of the target. Multi-wavelength imaging temperature measurement technology detects the multi-wavelength radiation image information of the target and inversely calculates the temperature field distribution of the target. Aiming at the inadequacy of color CCD-based multi-wavelength imaging temperature measurement, such as adaptability of the nonlinear spectral emissivity model, and the narrow dynamic range of temperature measurement, and so on, a four-wavelength non-scanning imaging temperature measurement method based on non-equal ratio filter color splitting at the diaphragm was proposed. This method could effectively compress the band imaging bandwidth to form four narrow band imaging detections, and was suitable for wide dynamic range temperature field measurement of nonlinear spectral emissivity model targets. A four-wavelength imaging thermometer was developed according to the proposed temperature measurement method. The thermometer was mainly composed of a window, a neutral optical attenuator, a four-color filter, an optical objective lens, a visible/near infrared integrated sensor, a measurement control unit, and software. The real temperature distribution of the target was obtained according to the multi-wavelength warming algorithm by the thermometer software. The target high-temperature field (800-2500 ℃) was tested under laser heating conditions. The comparison between the measurement result and the thermocouple data shows that the error is less than 1%, and the method has higher accuracy and better dynamic range adaptability.

High Throughput Dual-Wavelength Temperature Distribution Imaging Via Compressive Imaging

Compressive Single-Pixel Hyperspectral Imaging Using RGB Sensors

Photon Counting Correction Method to Improve the Quality of Reconstructed Images in Single Photon Compressive Imaging Systems.

Complementary Compressive Imaging for the Telescopic System

High-resolution Fast Mid-Wave Infrared Compressive Imaging.

Compressive Imaging and Spectroscopy – Beyond the Single Pixel Camera

Broad Dual-Band Temporal Compressive Imaging With Optical Calibration

Non-scanning Wide Range Multi-Wavelength Imaging Temperature Measurement Technology

Imaging Biological Tissue with High-Throughput Single-Pixel Compressive Holography

Reflective Single-Pixel Terahertz Imaging Based on Compressed Sensing

Dual-color terahertz spatial light modulator for single-pixel imaging

Three-Dimensional Single-Pixel Compressive Reflectivity Imaging Based On Complementary Modulation

High-Speed Real-Time Image Compression Based on All-Optical Discrete Cosine Transformation

A Terahertz Superconducting Single-Pixel Imaging System Using DMD

Terahertz two-pixel imaging based on complementary compressive sensing

Thermal Image Enhancement Through the Deconvolution Methods for Low-Cost Infrared Cameras.

3D compressive imaging system with a single photon-counting detector

Multi-Receivers And Sparse-Pixel Pseudo-Thermal Light Source For Compressive Ghost Imaging Against Turbulence

Single-shot Thermal Ghost Imaging Using Wavelength-Division Multiplexing

Compressive microscopic imaging with “positive–negative” light modulation

An FPGA-based Dual-Wavelength Correlated Imaging System with Flexible Frame Rates for Temperature Distributions