Telecommunications: u.s. Applications fall short.

A. Robinson

DOI: https://doi.org/10.1126/SCIENCE.182.4109.267

IF: 56.9

1973-10-19

Science

Abstract:

What problem does this paper attempt to address?

Photon Counting Correction Method to Improve the Quality of Reconstructed Images in Single Photon Compressive Imaging Systems.

Xinyuan Liu,Yue Ma,Song Li,Jian Yang,Zhiyu Zhang,Xin Tian

DOI: https://doi.org/10.1364/oe.443084

IF: 3.8

2021-01-01

Optics Express

Abstract:Compressive sensing has been widely used in single photon imaging systems because of its advantages of high efficiency and low cost. However, when the received photon flux is large, some photons cannot be recorded by single photon detectors due to the dead time effect, which introduces nonlinear errors between the measurement results and actual values and further damages the imaging quality. In this paper, a photon counting correction method specific to paralyzable detectors is proposed to improve the quality of reconstructed images in single photon compressive imaging systems. To verify this method, a single photon compressive imaging system is built, which uses a digital micromirror device (DMD) to modulate the light and a PMT as the single photon detector. The Monte Carlo simulation is also implemented to double validate the performance of the proposed method and the results from the experiment. Peak signal-to-noise ratio (PSNR) is used as the imaging quality evaluation standard. The experimental and simulation results indicate that our method can overcome negative effect of the dead time and accurately recover the intensity and waveform shape of echo signal, which can significantly improve the quality of reconstructed images and has a better performance than traditional methods in the single photon compressive imaging system.
3D Framing Camera System Based on Sample Cumulation Method

Yanbing Jiang,Huiming Yan,Xiuda Zhang,Long Wang,Yan Li

DOI: https://doi.org/10.1117/12.725097

2007-01-01

Abstract:A novel three-dimensional (3D) camera concept system could capture 3D image with thousands of pixels at range of several kilometer in real time was presented. The camera used a pulse laser to illuminate the scene, a solid-stat chargecouple device(CCD) sensor, and sample cumulation technology based on a gated binary image intensifier. The cumulation charges captured in CCD carried the information of range. The system was designed to have some significant advantages, such as low cost, simply schemes, high speed mainly limited to the speed of CCD frame capture. Potential applications include navigation of autonomous helicopter, large target identification, sensing and guidance, auto collision avoidance, robotic vision, atmospheric sensing and topography. In the paper, we discussed the fundamental principle and schemes of the 3D camera system based on sample cumulation and presented the feasible experiment result with a photo multiplier tube with binary character to simulate one pixel of the 3D camera system. Then we discussed the factors which influence the quality of 3D image according to the experiment result.
Polarisation-modulated Photon-Counting 3D Imaging Based on a Negative Parabolic Pulse Model

Rui Liu,Xin Tian,Song Li

DOI: https://doi.org/10.1364/oe.427997

IF: 3.8

2021-01-01

Optics Express

Abstract:Indirect methods based on intensity for time-of-flight measurement have attracted considerable research interest in recent years because they can provide high spatial resolution in 3D imaging. However, the majority of indirect methods are inapplicable when echo signals are small (e.g., less than one photon). We propose a novel polarisation-modulated photon-counting 3D imaging method based on a negative parabolic pulse model (NPPM) to solve this problem. We measure weak signals using the number of received photons after repetitive pulsed laser emission. We establish a computational method by exploring the relationship between photon flight time that corresponds to the polarisation-modulated state of photons controlled by phase shift and calculated photon rates from received photon-counting values based on Poisson negative log-likelihood function to calculate the distance. We specifically utilise the NPPM to estimate distribution of echo signals and reduce ranging error given that echo signals are constantly time-varying. We build the first experimental system for polarisation-modulated photon-counting 3D imaging for verification by integrating it with a dual-axis galvo scanning device. Experimental results demonstrate that the proposed method can achieve ranging accuracy at the millimeter-level and exhibit superior 3D imaging performance even when the average received number of echo signals per pulsed laser emission is smaller than 0.05.
A Compact Upconversion Single-Photon Imager for Full-Range and Accurate 3-D Imaging

Yiwei Chen,Chen Jiang,Yong Liu,Hongye Su,Xiaomin Hu,Yu Pan

DOI: https://doi.org/10.1109/tim.2023.3280500

IF: 5.6

2023-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:The rapid development of single-photon detection technology offers the possibility for an imaging system to go beyond traditional limits. Recently, single-photon imagers based on the upconversion technique have achieved unprecedentedly high resolution and noise tolerance in 3-D imaging. Nevertheless, the limited imaging range, complicated optical path, and long data acquisition time impose remaining challenges to practical applications. In this work, we build an upconversion single-photon imager for full-range and accurate 3-D imaging. A compact all-fiber design allows our system to work robustly in an open environment. Compared to the previous imagers, the imaging speed is increased by three orders of magnitude due to the high upconversion efficiency and photon-efficient algorithm. With the application of a high-repetition laser and a nanosecond optical delay line (ODL), we achieve full-range imaging under the upconversion scheme against high solar background noise. For close-up scenes, our imager achieves ultrahigh axial resolution up to 20 mu m, which is not affected by the time jitter or pileup effect of the single-photon detector. Our proposal can stimulate practical applications in sophisticated scenarios.
Single Photon Counting Compressive Imaging Based on a Sampling and Reconstruction Integrated Deep Network

Yanqiu Guan,Qiurong Yan,Shengtao Yang,Bing Li,Qianqian Cao,Zheyu Fang

DOI: https://doi.org/10.1016/j.optcom.2019.124923

IF: 2.4

2019-01-01

Optics Communications

Abstract:Single photon counting compressive imaging, a very efficient implementation of compressed sensing theory in photon counting imaging, offers the advantages of low cost and ultra-high sensitivity. However, when performing high-resolution imaging, single photon counting compressive imaging needs a long imaging time due to a lot of measurements and a large amount of image reconstruction calculations. In this paper, we demonstrate a single-photon counting compressed imaging system based a novel sampling and reconstruction integrated deep network. We call this network BF2C-Net. A binarized fully-connected layer is specially designed as the first layer of the network and trained out as a binary measurement matrix that can be directly loaded on the DMD to perform efficiently compressive sampling. The remaining layers of the network except the first layer are used to quickly reconstruct the compressed sensing image. The effects of compression sampling rate, measurement matrix and reconstruction algorithm on imaging performance are compared. The experimental results show that the BF2C-Net significantly outperforms existing iterative method and most other deep learning-based methods.
Deep-learning-based Single-Photon-counting Compressive Imaging Via Jointly Trained Subpixel Convolution Sampling.

Wen-Cheng Li,Qiu-Rong Yan,Yan-Qiu Guan,Sheng-Tao Yang,Cong Peng,Zhe-Yu Fang

DOI: https://doi.org/10.1364/ao.394410

IF: 1.9

2020-01-01

Applied Optics

Abstract:The combination of single-pixel-imaging and single-photon-counting technology can achieve ultrahigh-sensitivity photon-counting imaging. However, its applications in high-resolution and real-time scenarios are limited by the long sampling and reconstruction time. Deep-learning-based compressive sensing provides an effective solution due to its ability to achieve fast and high-quality reconstruction. This paper proposes a sampling and reconstruction integrated neural network for single-photon-counting compressive imaging. To effectively remove the blocking artefact, a subpixel convolutional layer is jointly trained with a deep reconstruction network to imitate compressed sampling. By modifying the forward and backward propagation of the network, the first layer is trained into a binary matrix, which can be applied to the imaging system. An improved deep-reconstruction network based on the traditional Inception network is proposed, and the experimental results show that its reconstruction quality is better than existing deep-learning-based compressive sensing reconstruction algorithms.
Adaptive compressed 3D imaging based on wavelet trees and Hadamard multiplexing with a single photon counting detector

Huidong Dai,Weiji He,Guohua Gu,Ling Ye,Tianyi Mao,Qian Chen

DOI: https://doi.org/10.48550/arXiv.1709.05961

2017-09-15

Computer Vision and Pattern Recognition

Abstract:Photon counting 3D imaging allows to obtain 3D images with single-photon sensitivity and sub-ns temporal resolution. However, it is challenging to scale to high spatial resolution. In this work, we demonstrate a photon counting 3D imaging technique with short-pulsed structured illumination and a single-pixel photon counting detector. The proposed multi-resolution photon counting 3D imaging technique acquires a high-resolution 3D image from a coarse image and edges at successfully finer resolution sampled by Hadamard multiplexing along the wavelet trees. The detected power is significantly increased thanks to the Hadamard multiplexing. Both the required measurements and the reconstruction time can be significantly reduced by performing wavelet-tree-based regions of edges predication and Hadamard demultiplexing, which makes the proposed technique suitable for scenes with high spatial resolution. The experimental results indicate that a 3D image at resolution up to 512*512 pixels can be acquired and retrieved with practical time as low as 17 seconds.
Measurement Matrix Construction for Large-area Single Photon Compressive Imaging

Hui Wang,Qiurong Yan,Bing Li,Chenglong Yuan,Yuhao Wang

DOI: https://doi.org/10.3390/s19030474

IF: 3.9

2019-01-24

Sensors

Abstract:We have developed a single photon compressive imaging system based on single photon counting technology and compressed sensing theory, using a photomultiplier tube (PMT) photon counting head as the bucket detector. This system can realize ultra-weak light imaging with the imaging area up to the entire digital micromirror device (DMD) working region. The measurement matrix in this system is required to be binary due to the two working states of the micromirror corresponding to two controlled elements. And it has a great impact on the performance of the imaging system, because it involves modulation of the optical signal and image reconstruction. Three kinds of binary matrix including sparse binary random matrix, m sequence matrix and true random number matrix are constructed. The properties of these matrices are analyzed theoretically with the uncertainty principle. The parameters of measurement matrix including sparsity ratio, compressive sampling ratio and reconstruction time are verified in the experimental system. The experimental results show that, the increase of sparsity ratio and compressive sampling ratio can improve the reconstruction quality. However, when the increase is up to a certain value, the reconstruction quality tends to be saturated. Compared to the other two types of measurement matrices, the m sequence matrix has better performance in image reconstruction.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Photon-Efficient Computational 3D and Reflectivity Imaging with Single-Photon Detectors

Dongeek Shin,Ahmed Kirmani,Vivek K Goyal,Jeffrey H. Shapiro

DOI: https://doi.org/10.48550/arXiv.1406.1761

2014-06-07

Abstract:Capturing depth and reflectivity images at low light levels from active illumination of a scene has wide-ranging applications. Conventionally, even with single-photon detectors, hundreds of photon detections are needed at each pixel to mitigate Poisson noise. We develop a robust method for estimating depth and reflectivity using on the order of 1 detected photon per pixel averaged over the scene. Our computational imager combines physically accurate single-photon counting statistics with exploitation of the spatial correlations present in real-world reflectivity and 3D structure. Experiments conducted in the presence of strong background light demonstrate that our computational imager is able to accurately recover scene depth and reflectivity, while traditional maximum-likelihood based imaging methods lead to estimates that are highly noisy. Our framework increases photon efficiency 100-fold over traditional processing and also improves, somewhat, upon first-photon imaging under a total acquisition time constraint in raster-scanned operation. Thus our new imager will be useful for rapid, low-power, and noise-tolerant active optical imaging, and its fixed dwell time will facilitate parallelization through use of a detector array.

Applications
Adaptive High-Resolution Imaging Method Based on Compressive Sensing

Zijiao Wang,Yufeng Gao,Xiusheng Duan,Jingya Cao

DOI: https://doi.org/10.3390/s22228848

2022-11-16

Abstract:Compressive sensing (CS) is a signal sampling theory that originated about 16 years ago. It replaces expensive and complex receiving devices with well-designed signal recovery algorithms, thus simplifying the imaging system. Based on the application of CS theory, a single-pixel camera with an array-detection imaging system is established for high-pixel detection. Each detector of the detector array is coupled with a bundle of fibers formed by fusion of four bundles of fibers of different lengths, so that the target area corresponding to one detector is split into four groups of target information arriving at different times. By comparing the total amount of information received by the detector with the threshold set in advance, it can be determined whether the four groups of information are calculated separately. The simulation results show that this new system can not only reduce the number of measurements required to reconstruct high quality images but can also handle situations wherever the target may appear in the field of view without necessitating an increase in the number of detectors.
Single photon imaging based on a photon driven sparse sampling

Zhen Chen,Huachuang Wang,Yang Yu,Bo Liu,Guangmeng Guo,Cheng He

DOI: https://doi.org/10.1364/OE.455544

2022-04-11

Abstract:Single photon three-dimensional (3D) imager can capture 3D profile details and see through obscuring objects with high sensitivity, making it promising in sensing and imaging applications. The key capabilities of such 3D imager lie on its depth resolution and multi-return discrimination. For conventional pulsed single photon lidar, these capabilities are limited by transmitter bandwidth and receiver bandwidth simultaneously. A single photon imager is proposed and experimentally demonstrated to implement time-resolved and multi-return imaging. Time-to-frequency conversion is performed to achieve millimetric depth resolution. Experimental results show that the depth resolution is better than 4.5 mm, even though time jitter of the SPAD reaches 1 ns and time resolution of the TCSPC module reaches 10 ns. Furthermore, photon driven sparse sampling mechanism allows us to discriminate multiple near surfaces, no longer limited by the receiver bandwidth. The simplicity of the system hardware enables low-cost and compact 3D imaging.
Optimal compressive multiphoton imaging at depth using single-pixel detection

Philip Wijesinghe,Adrià Escobet-Montalbán,Mingzhou Chen,Peter R T Munro,Kishan Dholakia

DOI: https://doi.org/10.1364/OL.44.004981

2019-07-04

Abstract:Compressive sensing can overcome the Nyquist criterion and record images with a fraction of the usual number of measurements required. However, conventional measurement bases are susceptible to diffraction and scattering, prevalent in high-resolution microscopy. Here, we explore the random Morlet basis as an optimal set for compressive multiphoton imaging, based on its ability to minimise the space-frequency uncertainty. We implement this approach for the newly developed method of wide-field multiphoton microscopy with single-pixel detection (TRAFIX), which allows imaging through turbid media without correction. The Morlet basis is well-suited to TRAFIX at depth, and promises a route for rapid acquisition with low photodamage.

Optics,Image and Video Processing
Sub-Bin Delayed High-Range Accuracy Photon-Counting 3D Imaging

Hao-Meng Yin,Hui Zhao,Ming-Yang Yang,Yong-An Liu,Li-Zhi Sheng,Xue-Wu Fan

DOI: https://doi.org/10.3390/photonics11020181

IF: 2.536

2024-02-17

Photonics

Abstract:The range accuracy of single-photon-array three-dimensional (3D) imaging systems is limited by the time resolution of the array detectors. We introduce a method for achieving super-resolution in 3D imaging through sub-bin delayed scanning acquisition and fusion. Its central concept involves the generation of multiple sub-bin difference histograms through sub-bin shifting. Then, these coarse time-resolution histograms are fused with multiplied averages to produce finely time-resolved detailed histograms. Finally, the arrival times of the reflected photons with sub-bin resolution are extracted from the resulting fused high-time-resolution count distribution. Compared with the sub-delayed with the fusion method added, the proposed method performs better in reducing the broadening error caused by coarsened discrete sampling and background noise error. The effectiveness of the proposed method is examined at different target distances, pulse widths, and sub-bin scales. The simulation analytical results indicate that small-scale sub-bin delays contribute to superior reconstruction outcomes for the proposed method. Specifically, implementing a sub-bin temporal resolution delay of a factor of 0.1 for a 100 ps echo pulse width substantially reduces the system ranging error by three orders of magnitude. Furthermore, Monte Carlo simulations allow to describe a low signal-to-background noise ratio (0.05) characterised by sparsely reflected photons. The proposed method demonstrates a commendable capability to simultaneously achieve wide-ranging super-resolution and denoising. This is evidenced by the detailed depth distribution information and substantial reduction of 95.60% in the mean absolute error of the reconstruction results, confirming the effectiveness of the proposed method in noisy scenarios.

optics
Three-dimensional imaging by compressed sensing based dual-frequency laser phase ranging

Yuchen Jie,Xiaotian Li,Zilong Zhang,Jie Wang,Yetong Hu,Yabi Li,Wei He,Changming Zhao

DOI: https://doi.org/10.1063/5.0152561

IF: 5.6

2023-07-01

APL Photonics

Abstract:Scanless three-dimensional (3D) imaging technology has received extensive attention in recent years due to its rapid detection and system reliability. Compressed sensing imaging technology provides a new solution for the realization of scan-free 3D imaging. In this paper, a 3D imaging method based on dual-frequency laser phase ranging based on compressed sensing technology is introduced and realized. Using the combination of dual-frequency laser phase ranging and compressed sensing theory, two-dimensional range reconstruction from the time-domain light intensity signal collected by a single-point detector is performed. Aiming at the spatial sparsity of the target scene, this technology uses the compressed sensing algorithm to solve the phase information of the two-dimensional spatial distribution contained in the time domain signal so as to invert the 3D image information of the target scene and realize the effect of scanning-free 3D imaging. First, the feasibility of the system is verified by simulations, and the imaging effects of different reconstruction algorithms on different terrains are compared. Second, a non-scanning 3D imaging experimental platform is designed and built. Finally, the 3D images of multiple objects with 32 × 32 resolution are successfully reconstructed through experiments with a compression ratio of 0.25. The ranging accuracy of this system is 0.05 m. This work is promising for applications in multiple objects’ fast detections.

optics,physics, applied
A photon-efficient method based on curve fitting for photon counting 3D imaging lidar

Ling Ye,Guohua Gu,Weiji He,Wenye Yin,Jie Lin,Jian Fang,Wenye YIN,Jie LIN,Jian FANG

DOI: https://doi.org/10.1117/12.2317805

2018-09-18

Abstract:Time-of-flight (TOF) Lidar is widely used in capturing three-dimensional (3D) structure and reflectivity information. For using Geiger-mode avalanche photodiode (Gm-APD) and the technique time correlated single photon counting (TCSPC), a direct-detection 3D imaging lidar has high sensitivity in low-light-level (LLL) scene. Traditional method needs long fixed dwell time to collect tens of thousands of photons to find accurate range and mitigate Poisson noise at each pixel. We present a method that acquires accurate depth and intensity images using a small amount of detected echo photons and having quantitative analysis to estimate whether results are in the confidence interval. Based on prior knowledge that the echo signal is in the shape of emitted laser, we use one or two orders of magnitude back-reflected photons less than traditional method, fitting a curve of laser-return pulse by nonlinear least-squares fitting in order to obtain the range. The condition of moving to next pixel in our method is acquiring a fixed number of back-reflected photons, instead of sampling for a fixed time. This adaptive jump condition is able to speed up the scanning without more distortion. The results are analyzed with chi-square test to determine if the curve we fit has enough credibility. This quantitative analysis provides an important judgment condition for our method of fitting curve to recover the depth image. Experimental results demonstrate that our method is able to obtain the millimeter accuracy depth image in the confidence interval using hundreds of photons and increases photon-efficiency more than 10-fold over traditional method. Thus our method will be useful in LLL scene, such as military reconnaissance and remote sensing.
Single Photon Counting Compressive Imaging Using a Generative Model Optimized Via Sampling and Transfer Learning.

Wei Gao,Qiu-Rong Yan,Hui-Lin Zhou,Sheng-Tao Yang,Zhe-Yu Fang,Yu-Hao Wang

DOI: https://doi.org/10.1364/oe.413925

IF: 3.8

2021-01-01

Optics Express

Abstract:Single photon counting compressive imaging, a combination of single-pixel-imaging and single-photon-counting technology, is provided with low cost and ultra-high sensitivity. However, it requires a long imaging time when applying traditional compressed sensing (CS) reconstruction algorithms. A deep-learning-based compressed reconstruction network refrains iterative computation while achieving efficient reconstruction. This paper proposes a compressed reconstruction network (OGTM) based on a generative model, adding sampling sub-network to achieve joint-optimization of sampling and generation for better reconstruction. To avoid the slow convergence caused by alternating training, initial weights of the sampling and generation sub-network are transferred from an autoencoder. The results indicate that the convergence speed and imaging quality are significantly improved. The OGTM validated on a single-photon compressive imaging system performs imaging experiments on specific and generalized targets. For specific targets, the results demonstrate that OGTM can quickly generate images from few measurements, and its reconstruction is better than the existing compressed sensing recovery algorithms, compensating defects of the generative models in compressed sensing.
Single-shot Compressed 3D Imaging by Exploiting Random Scattering and Astigmatism

Qiong Gao,Weidong Qu,Ming Shao,Wei Liu,Xiangzheng Cheng

DOI: https://doi.org/10.48550/arXiv.2105.10073

2021-05-21

Abstract:Based on point spread function (PSF) engineering and astigmatism due to a pair of cylindrical lenses, a novel compressed imaging mechanism is proposed to achieve single-shot incoherent 3D imaging. The speckle-like PSF of the imaging system is sensitive to axial shift, which makes it feasible to reconstruct a 3D image by solving an optimization problem with sparsity constraint. With the experimentally calibrated PSFs, the proposed method is demonstrated by a synthetic 3D point object and real 3D object, and the images in different axial slices can be reconstructed faithfully. Moreover, 3D multispectral compressed imaging is explored with the same system, and the result is rather satisfactory with a synthetic point object. Because of the inherent compatibility between the compression in spectral and axial dimensions, the proposed mechanism has the potential to be a unified framework for multi-dimensional compressed imaging.

Optics,Image and Video Processing
Single-Photon Compressive Imaging Based on Residual Codec Network

Guan Yanqiu,Yan Qiurong,Yang Shengtao,Li Bing,Cao Qianqian,Fang Zheyu

DOI: https://doi.org/10.3788/aos202040.0111022

2020-01-01

Acta Optica Sinica

Abstract:When performing high-resolution imaging using a single-photon compressive technique, a long imaging time is required owing to numerous measurements and a large number of image-reconstruction calculations. We demonstrate a sampling-and-reconstruction-integrated residual codec network, namely SRIED-Net, for single-photon compressive imaging. We use the binarized fully connected layer as the first layer of the network and train it into a binary-measurement matrix to directly load onto the digital micromirror device for efficient compressive sampling. The remaining layers of the network arc used to quickly reconstruct the compressed sensing image. We compare the effects of the compressive sampling rate, measurement matrix, and reconstruction algorithm on imaging performance through a series of simulations and system experiments. The experimental results show that SRIED-Net is superior to the current advanced iterative algorithm TVAL3 at a low measurement rate and that its imaging quality is similar to that of TVAL3 at a high measurement rate. It is superior to current deep-learning-based methods at all measurement rates.
Scanning‐Driven Photon‐Counting 3D Imaging through Scattering Media Via Asynchronous Polarization Modulation

Rui Liu,Zhiyuan Zhang,Xin Tian

DOI: https://doi.org/10.1002/lpor.202300916

2024-01-14

LASER & PHOTONICS REVIEWS

Abstract:This work presents a scanning‐driven photon‐counting 3D imaging system through scattering media via asynchronous polarization modulation. An asynchronous polarization‐modulated ranging method based on Gamma pulse model and a time reshaping method are further proposed to achieve 3D imaging through strong scattering media. The excellent imaging performance and the generalization capability in real applications are verified by abundant experimental results. Imaging through scattering media is widely studied in various applications including industrial inspection and autonomous driving. Most existing image sensors always suffer from the aliasing effect that generates a diffused image, leading to an extremely challenging problem in recovering targets of high quality, especially for 3D imaging. In this study, a scanning‐driven photon‐counting 3D imaging system through scattering media is proposed via asynchronous polarization modulation. To eliminate the aliasing effect, we utilize a point‐to‐point scanning strategy is used to illuminate the target and a photon‐counting detector to perceive weak echo signals passing through scattering media. Then, an asynchronous polarization‐modulated ranging method is proposed innovatively based on the Gamma pulse model to calculate the relative depth of the target for 3D imaging with the consideration of scattering media's difference. Therefore, the accuracy of the calculated depth and the generalization capability of the proposed method in real applications can be significantly improved. In addition, a time reshaping method is proposed to cope with the depth ambiguity caused by asynchronous measurements. In the experiment, a variety of strong scattering media is used to verify the excellent imaging capability of the proposed method.
Lensless compressive sensing with annulus-sector-shaped pixel geometry in the photon-starved environment

Zhupeng Li,Ming Lei,Qiang Liu,Mali Gong,Xing Fu

DOI: https://doi.org/10.1016/j.optlaseng.2020.106232

IF: 5.666

2020-11-01

Optics and Lasers in Engineering

Abstract:<p>To achieve fast compressive object classification and imaging in photon-starved environment, we put forward a novel lensless sensing configuration based on annulus-sector-shaped pixels, where pixels located at different annulus correspond to different temporal profile of photon-counting histogram, thus mapping the spatial distribution features of target to the signatures at the temporal domain. A model is established based on the superposition of different temporal contributions, and solved by exploiting the rotational symmetry of each sector and dramatically reduced solution space. Object classification among 62 classes is conducted with a single-pixel single-photon detector, achieving the classification accuracy of 94.56% at the total operating time of 1 s, corresponding to ~0.82 photons per pixel and a compressive ratio as small as 0.98%. Our method is verified to have great potential in the high-speed photon-limited sensing.</p>

optics

Telecommunications: u.s. Applications fall short.

Photon Counting Correction Method to Improve the Quality of Reconstructed Images in Single Photon Compressive Imaging Systems.

3D Framing Camera System Based on Sample Cumulation Method

Polarisation-modulated Photon-Counting 3D Imaging Based on a Negative Parabolic Pulse Model

A Compact Upconversion Single-Photon Imager for Full-Range and Accurate 3-D Imaging

Single Photon Counting Compressive Imaging Based on a Sampling and Reconstruction Integrated Deep Network

Deep-learning-based Single-Photon-counting Compressive Imaging Via Jointly Trained Subpixel Convolution Sampling.

Adaptive compressed 3D imaging based on wavelet trees and Hadamard multiplexing with a single photon counting detector

Measurement Matrix Construction for Large-area Single Photon Compressive Imaging

Photon-Efficient Computational 3D and Reflectivity Imaging with Single-Photon Detectors

Adaptive High-Resolution Imaging Method Based on Compressive Sensing

Single photon imaging based on a photon driven sparse sampling

Optimal compressive multiphoton imaging at depth using single-pixel detection

Sub-Bin Delayed High-Range Accuracy Photon-Counting 3D Imaging

Three-dimensional imaging by compressed sensing based dual-frequency laser phase ranging

A photon-efficient method based on curve fitting for photon counting 3D imaging lidar

Single Photon Counting Compressive Imaging Using a Generative Model Optimized Via Sampling and Transfer Learning.

Single-shot Compressed 3D Imaging by Exploiting Random Scattering and Astigmatism

Single-Photon Compressive Imaging Based on Residual Codec Network

Scanning‐Driven Photon‐Counting 3D Imaging through Scattering Media Via Asynchronous Polarization Modulation

Lensless compressive sensing with annulus-sector-shaped pixel geometry in the photon-starved environment