Abstract:The present article investigates the microstructure and mechanical properties of A356 matrix composite reinforced with TiB 2 particles synthesized by the salt metal reaction of as-cast and T6 state. Microscopic observations of the prepared composites reveal that in-situ grown TiB 2 particles are characterized with regular shapes and nearly uniform distributed in the A356 matrix. A clear interface between the A356 matrix and TiB 2 particles was observed. The detailed analysis of mechanical properties of synthesized composites of as-cast and T6 state show that the ultimate tensile strength and Young’s modulus of the synthesized composites increased with the increasing weight percentage (wt%) of in-situ TiB 2 particles in the A356 matrix, but the Poisson’s ratio of the synthesized composites decreased with the increase of TiB 2 particles wt%. The Young’s modulus of the composites increased by up to 10.8% and the Poisson’s ratio decreased by up to 3.2% with the increase of TiB 2 particles wt%, compared to A356 alloy. With the increase of TiB 2 particle wt%, the yield strength of the composites decreased at first (when the TiB 2 particle wt% is less than 1%) then increased, while elongation and percent reduction in area increased at first and then decreased. Furthermore, T6 heat treatment can refine grain and effectively improve the mechanical properties of composites.

Processing and Tensile Properties of A356 Composites Containing in Situ Small-Sized Al3Ti Particulates

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

Ultrasound Assisted In-Situ Casting Technique for Synthesizing Small-Sized Blocky Al3Ti Particles Reinforced A356 Matrix Composites with Improved Mechanical Properties

Effects of the addition of Ti powders on the microstructure and mechanical properties of A356 alloy

Mechanical Properties of In-Situ TiB2/A356 Composites

Microstructure and Properties of In-Situ Tib2 Particulates Reinforced A356 Composite

Microstructure And Mechanical Properties Of In Situ A356/Tib2 Composites

Microstructure and Mechanical Properties of Aluminum Matrix Composites Reinforced With In-Situ TiB2 Particles

Microstructure And Properties Of In Situ A356/Tib2 Composite

Microstructure and properties of in-situ TiB 2 particulates reinforced A356 composite

Fabrication and properties of in situ (Al3Zr + Al2O3)p/A356 composites cast by permanent mould and squeeze casting

In Situ Formation of Al3Ti and Its Effects on the Microstructure, Hardness and Tribological Properties of Al Matrix Composites with Various Ti Contents

Microstructure and Mechanical Properties of In-Situ TiB 2 /A356 Composites and a Prediction Model of Yield Strength

Processing, Microstructure and Mechanical Properties of Ti6Al4V Particles-Reinforced Mg Matrix Composites

In situ formed Al 3 Ti particles in Al alloy matrix and their effects on the microstructure and mechanical properties of 7075 alloy

In situ TiB2 particulate reinforced near eutectic Al–Si alloy composites

Microstructure and Mechamcal Properties of In-Situ TiB2/A356 Composites and a Prediction Model of Yield Strength

Effect of Initial Ti Powders Size on the Microstructures and Mechanical Properties of Al3Ti/2024 Al Composites Prepared by Ultrasonic Assisted In-Situ Casting

Microstructures and mechanical properties of in-situ TiB2/Al-Si-Mg composites

Microstructure and Mechanical Properties of Ti2AlC Particle and In-Situ TiAl3 Reinforced Pure Al Composites

Structure-functional materials of in situ TIB particulates reinforced A356 composite