Abstract:In this report, a series of N-doped porous carbon materials were successfully prepared from nitrogen-containing porous organic framework JUC-Z2. Compared to original JUC-Z2, the carbonized samples show obviously enhanced gas uptake and isosteric heats of adsorption ( Q st for short). Among the carbonized samples, JUC-Z2-900 shows high CO 2 uptake of 113 cm 3 •g － 1 at 273 K and 1 bar and H 2 sorption of 246 cm 3 •g － 1 at 77 K and 1 bar, surpassing most reported porous materials. Especially for CH 4 sorption, a large sorption amount of 60 cm 3 •g － 1 could be achieved at 273 K and 1 bar. To our best knowledge, this value is comparable to the highest among all the porous materials reported to date. Apart from high gas uptake, the carbon materials also show selective adsorption ability. At 273 K, JUC-Z2-900 shows a high CO 2 /N 2 adsorption selectivity of 10 and CO 2 /H 2 adsorption selectivity of 66. Raman spectra showed two Raman shifts, the G-band at 1590 cm － 1 is associated with the E 2g mode of graphite, whereas the D-band centered at around 1360 cm － 1 is attributed to the D-band of disordered carbon, corresponding to the defect-induced mode. The intensity of D-band is higher than G-band, indicating a low degree of graphitization. This is also confirmed by powder X-ray diffraction results. X-ray Photoelectron Spectroscopy (XPS) results indicate the nitrogen content is 3.26 wt%, 2.88 wt% and 2.19 wt% for JUC-Z2-700, JUC-Z2-800 and JUC-Z2-900 respectively. Though the nitrogen content decreased after carbonization, the gas sorption increased greatly. This can be attributed to the increased heat of adsorption of the carbonized samples. First, the narrow pore size after carbonization is beneficial for gas storage. Reports indicate that by tuning the pore sizes to around the kinetic diameter of CO 2 , it may be possible to increase the number of double or multiple interactions between the adsorbed CO 2 and the pore walls. Second, the all-carbon-scaffold networks also benefit the gas-adsorbent interaction. Last but not the least, the N-doped framework also devote the high gas uptake. Besides the high gas uptake, the carbon materials exhibit high thermal stabilities and could be stable up to 500 ℃ . Based on the above results, the carbon materials show great potential in the fields of CO 2 capture and clean energy storage.

Nitrogen-doped porous carbons derived from isomeric metal azolate frameworks

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Nitrogen-Doped Porous Carbons Derived from Triarylisocyanurate-Cored Polymers with High CO2 Adsorption Properties

Preparation of N-doped Porous Carbon from Porous Organic Framework for Gas Sorption

New Nitrogen-Rich Azo-Bridged Porphyrin-Conjugated Microporous Networks For High Performance Of Gas Capture And Storage

Zif-Derived In Situ Nitrogen Decorated Porous Carbons For Co2 Capture

Nitrogen-Doped microporous carbons derived from azobenzene and nitrile-functionalized polybenzoxazines for CO2 uptake

Nitrogen-Doped Ultrahigh Microporous Carbons Derived from Two Nitrogen-Containing Post-Cross-Linked Polymers for Efficient CO2 Capture

Heteroatom-doped porous carbons exhibit superior CO2 capture and CO2/N2 selectivity: Understanding the contribution of functional groups and pore structure

Hierarchically Structured Porous Nitrogen-Doped Carbon for Highly Selective Co2 Capture

Ultrahigh-CO2 Adsorption Capacity and CO2/N2 Selectivity by Nitrogen-Doped Porous Activated Carbon Monolith

Nitrogen-Enriched Hierarchical Porous Carbon for Carbon Dioxide Adsorption and Separation

Benzimidazole Precursor-Derived N-Doping Porous Carbon with High-Efficiency Co2 Selective Adsorption: Insight from Experimental and Theoretical Study

Micromesoporous Nitrogen-Doped Carbon Materials Derived From Direct Carbonization Of Metal-Organic Complexes For Efficient Co2 Adsorption And Separation

Novel Porous Carbon Materials With Ultrahigh Nitrogen Contents For Selective Co2 Capture

Synthesis of Nitrogen-Rich Nanoporous Carbon Materials with C3N-type from ZIF-8 for Methanol Adsorption

Highly Nitrogen-Doped Porous Carbon Derived from Zeolitic Imidazolate Framework-8 for CO2 Capture

A template-catalyzed in situ polymerization and co-assembly strategy for rich nitrogen-doped mesoporous carbon

Synthesis of a Nitrogen-Doped Porous Carbon Monolith and Its Use for CO2 Capture

Ultramicroporous Carbon with Extremely Narrow Pore Distribution and Very High Nitrogen Doping for Efficient Methane Mixture Gases Upgrading

Synergistic effect of pore generation and nitrogen doping on the enhanced CO 2 capture and selectivity of carbon nanofibers