Abstract:Recently, the utilization of lithium has increased significantly, particularly in high-tech industries such as nuclear, aerospace, automotive, battery, military, glass and ceramic, and lubricants. However, lithium recovery methods from brines present certain drawbacks, making lithium exploitation a global challenge. A comparative analysis of lithium recovery methods from brine solutions indicates that the adsorption method holds promising potential for separating lithium from low-concentration solutions. Despite this, the quest for an effective and efficient adsorbent for lithium-ion adsorption remains a challenge, necessitating the development of an adsorbent, using readily available materials. In this study, carbon-active underwent chemical modification. Notably, the co-precipitation method was employed for the first time to create a composite adsorbent decorated with manganese dioxide (MnO 2 ). Various analyses, including XRD, SEM-EDS, FTIR, and BET, were conducted to elucidate the structural, morphological, physical, and chemical properties of the adsorbent. This synthesized adsorbent was applied to the adsorption of lithium from an aqueous sample. Exploration of adsorption parameters affecting capacity led to the identification of optimal conditions: 14-hour duration, an adsorbent dosage of 0.02 g, and an ambient temperature of 25°C, in a lithium solution with a concentration of 60.4 ppm. Under these conditions, the maximum adsorption capacity of the adsorbent was determined to be 30.5 mg/g. Based on experimental results, kinetic and adsorption isotherm models were investigated. The Pseudo-quadratic kinetic model, with an R 2 value of 0.999, emerged as the most suitable for describing the adsorbent's behavior. The Hill isotherm model with R2 = 0.9634 is the most appropriate isotherm model to describe the adsorbent behavior. Additionally, the selectivity of the adsorbent in the presence of other ions was investigated. The adsorbent's reusability was examined, and after two recycling periods, the adsorbent maintained an efficiency of up to 88%, demonstrating its stability. The CAC-MnO2-P composite adsorbent shows technical and economic promise for industrial use in lithium-ion recovery processes.

Synthesis of Ion Imprinted Nanocomposite Membranes for Selective Adsorption of Lithium

Extraction of lithium ions from acidic solution using electrochemically imprinted membrane

Fabrication of Highly Selective Ion Imprinted Macroporous Membranes with Crown Ether for Targeted Separation of Lithium Ion

Preparation of a novel ion-imprinted membrane using sodium periodate-oxidized polydopamine as the interface adhesion layer for the direction separation of Li+ from spent lithium-ion battery leaching solution

Multilayered Ion-Imprinted Membranes with High Selectivity Towards Li+ Based on the Synergistic Effect of 12-Crown-4 and Polyether Sulfone

A Novel Approach Toward Fabrication of Porous Molecularly Imprinted Nanocomposites with Bioinspired Multilevel Internal Domains: Application to Selective Adsorption and Separation Membrane

A novel lithium ion-imprinted membrane with robust adsorption capacity and anti-fouling property based on the uniform multilayered interlayer

Ion-imprinted antifouling nanocomposite membrane for separation of lithium ion

Thermo-responsive ion imprinted polymer on the surface of magnetic carbon nanospheres for recognizing and capturing low-concentration lithium ion

A lithium ion-imprinted adsorbent using magnetic carbon nanospheres as a support for the selective recovery of lithium ions

Fabrication of Lithium Ion Imprinted Hybrid Membranes with Antifouling Performance for Selective Recovery of Lithium

Facile Synthesis of Degradable CA/CS Imprinted Membrane by Hydrolysis Polymerization for Effective Separation and Recovery of Li+

Nitrogen-doped substrate material ion imprinting–capacitive deionization selective recovery of lithium ions from acidic solutions

Crown Ether Grafted Graphene Oxide/Chitosan/Polyvinyl Alcohol Nanofiber Membrane for Highly Selective Adsorption and Separation of Lithium Ion

Bioinspired Synthesis of SiO2/pDA-based Nanocomposite-Imprinted Membranes with Sol-Gel Imprinted Layers for Selective Adsorption and Separation Applications

Bio-inspired adhesion: Fabrication of molecularly imprinted nanocomposite membranes by developing a hybrid organic–inorganic nanoparticles composite structure

Ion-selective Supramolecular Membrane with Ph-Regulated Smart Nanochannels for Lithium Extraction

Ion-imprinted membranes for lithium recovery: A review

Enhancement of lithium extraction from low grade brines by highly hydrophilic blend membranes using MnO 2 ion sieve as adsorbents

Development of a Manganese Dioxide-Decorated Activated Carbon Nano-sorbent via Co-precipitation method for efficient lithium ion adsorption from aqueous solutions

Electrospun nanofiber membrane of dibenzo 14-crown-4-ether polyimide for efficient selective lithium recovery from discarded lithium-ion batteries