Abstract:Permanent magnet Vernier motors (PMVMs) possess the advantage of high torque density for high-performance applications. However, the low power factor challenge makes it unacceptable for direct-drive applications. A lack of accurate modeling method based on the motor sizing law, i.e., air-gap flux density, linear current density, and motor geometry parameters, raises difficulties for machine designers to further conduct research on the performance metrics. This article presents a deep investigation into the analytical modeling technique for surface PMVMs (SPMVMs). It can identify an accurate approach to obtain the performance metrics, including electromagnetic torque and power factor. The modeling technique is developed based on the conformal mapping method. By using this, both radial and tangential permeability functions can be calculated to obtain the motor magnetic loading accurately, considering the leakage flux. The slotting effect on both air-gap flux density and armature-winding function is analyzed to achieve a precise formula for torque and power factor computations. The new modeling technique is applied to integral-slot SPMVMs with different slot/pole combinations, gear ratios, slot openings, and magnet thickness to evaluate the impacts of motor parameters on high-power-factor and high-torque-density designs. Finally, an SPMVM with the characteristics of high torque density and power factor is fabricated to verify the analytical model at the power rating of 0.8 kW and the speed of 500 r/min. The experimental results show that the prototype exhibits a high power factor of 0.9 and high torque density 22.5 Nm/L.

Design and Experiment of Surface-Mounted Permanent-Magnet Motors with Integrated Magnetizing Windings

Research of Post-Assembly Magnetization of Large-Power Surface-Mounted Rare-Earth Permanent Magnet Machines with Integrated Magnetizing Winding

Design and Experiment of Post-Assembly Magnetization System for a 160-Kw Interior Permanent-Magnet Motor

Study of a Post-Assembly Magnetization Method of a V-Type Rotor of Interior Permanent Magnet Synchronous Motor for Electric Vehicle

Design of in-wheel permanent magnet synchronous motor with concentrated fractional-slot winding and winding switching technology

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Design of a Dual-Stator Superconducting Permanent Magnet Wind Power Generator with Different Rotor Configuration

Design of A Novel Permanent Magnet Linear Synchronous Motor with Segmented Armature Core for Ropeless Lifter

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

New Proposal of 80-Krpm High-Speed Surface-Mounted Permanent-Magnet Synchronous Motor

Design and Analysis of Modulated Magnetic Pole for Dual Three-Phase Surface-Mounted Permanent Magnet Synchronous Motor

Post-Assembly Magnetization of High Speed Pm Rotor with Metallic Sleeve

Design and Analysis of a New Hybrid Excitation Vernier Motor with Reduced Permanent Magnet

Modeling and Design of an Integrated Winding Synchronous Permanent Magnet Planar Motor

Design of A Novel Axial-Radial Flux Permanent Magnet Motor

Design of a Novel PM Motor with Hybrid Magnetized IPM External Rotor for In-wheel Drive Application

Design of Post-Assembly Magnetization System of the Rotor of Disk Coreless Permanent Magnet Motor Based on Halbach Array

Deep-investigated Analytical Modeling of a Surface Permanent Magnet Vernier Motor

A New Robust Design Method of a Hairpin Winding Permanent Magnet Motor with High Solving Efficiency