Abstract:Model predictive torque control (MPTC) with the utilization of virtual voltage vector (VVV) reduces the current harmonics of dual three-phase permanent magnet synchronous motor (PMSM). Nevertheless, employing VVVs characterized by large step increments and fixed amplitudes is liable to induce significant torque ripple. Focusing on the negative impact of the amplitude and phase of the applied voltage vector on torque control, this paper introduces a MPTC method using novel VVV to effectively mitigate torque ripple and suppress current harmonics. Firstly, the amplitude and phase information of the expected reference voltage vector (RVV) is obtained by deadbeat direct torque and flux control (DB-DTFC) methods. Subsequently, a novel VVV set is constructed to reduce the effect of the phase difference between the expected RVV and the applied voltage vector. Then, based on the impact stemming from the amplitude deviation between three candidate voltage vectors and the expected RVV, the action time of these candidate voltage vectors are optimized in the form of duty cycle. The optimal vector is then determined through the cost function, thereby further reducing the torque ripple. Finally, experimental results are offered to verify the effectiveness of the proposed MPTC method.

Model Predictive Torque-Vector Control for Four-Switch Three-Phase Inverter-Fed PMSM with Capacitor Voltage Offset Suppression

A Simplified MPFC with Capacitor Voltage Offset Suppression for the Four-Switch Three-Phase Inverter-Fed PMSM Drive

Dynamic control set-model predictive control for field-oriented control of VSI-PMSM

An Error Tracking Dead-beat Model Predictive Torque Control for Open-Winding Permanent Magnet Synchronous Motor with Common DC Bus

Model predictive flux control for permanent magnet synchronous motor

Model Predictive Torque Control for Dual Three-Phase PMSM based on Novel Virtual Voltage Vector

Modulated Model Predictive Torque Control for Fault-Tolerant Inverter-Fed Induction Motor Drives With Single DC-Link Voltage Sensor

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Finite Control Set Model Predictive Torque Control With Reduced Computation Burden for PMSM Based on Discrete Space Vector Modulation

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Triple-Voltage-Vector Model-Free Predictive Current Control for Four-Switch Three-Phase Inverter-Fed SPMSM Based on Discrete-Space-Vector Modulation

Model Predictive Torque Control of Surface Mounted Permanent Magnet Synchronous Motor Drives with Voltage Cost Functions

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Novel Virtual-Finite-Control-Set-Based Model Predictive Torque Control of Five-Phase PMSM With Enhanced Third Harmonic Current Suppression

A Simplified Model Predictive Control for Open-Winding PMSM

Three-Vector-Based Model Predictive Torque Control for a Permanent Magnet Synchronous Motor of EVs

Deadbeat Model-Predictive Torque Control With Discrete Space-Vector Modulation for PMSM Drives

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation

Four-Switch Inverter Fed PMSM DTC with SVM approach for Fault Tolerant operation

New model based predictive torque control algorithm in combination with duty ratio modulation strategy for flux-switching permanent magnet synchronous machines

Predictive Torque Control for PMSM Based on Weighting Factor Elimination and Fast Voltage Vector Selection