Abstract:High power density is one of the development directions of photovoltaic systems. In order to achieve this goal, the efficiency of converters should be further improved; the loss of power devices should be further reduced; and the volume of the AC side filter should be further reduced by increasing the switching frequency. However, the performance of Si-based converters cannot well meet the development requirements. A clear trend in today's research is to increase the switching frequency and reduce power device losses by using wideband gap (WBG) devices which have much lower switching losses. Nowadays, the manufacturing process of SiC devices is gradually matured. But the latest price of SiC device is still several times higher than that of Si device, which limits its wide application. Thus, it is more practical to replace only a part of the devices in a converter with SiC MOSFETs. This paper presents two application schemes for SiC & Si hybrid modules to reduce losses, increase switching frequency, and increase power density based on three-level ANPC topology. Scheme 1 is the topology with four SiC MOSFETs and two Si IGBTs. Scheme 2 is the topology with two SiC MOSFETs and four Si IGBTs. The modulation strategies applicable to the two schemes are illustrated respectively, and the losses of the two schemes are analyzed and compared. This article also proposes a new calorimetric loss measurement method. The proposed measurement device is simple with just a cuboid metal block and two thermocouples. The steady state temperature difference of the cuboid metal block is chosen as the measurement value, ignoring the effects of ambient temperature changes and easy to achieve accurately. Thermal-circuit model are established to explain the proposed measurement principle. Based on a comprehensive consideration of the loss and cost of the two schemes, this paper optimizes one of the schemes to perform a loss measurement experiment using the proposed loss measurement method.

Power Losses of Si/SiC Semiconductors in Medium Voltage Energy Router Sub-Modules with Hybrid Topology

Evaluation of Power Losses in Different CCM Mode Single-Phase Boost PFC Converters Via a Simulation Tool

High Power Three-Level Rectifier Comprising SiC MOSFET & Si Diode Hybrid Power Stage

Hybrid SiC-Si DC–AC Topology: SHEPWM Si-IGBT Master Unit Handling High Power Integrated with Partial-Power SiC-MOSFET Slave Unit Improving Performance

Sic Mosfet Zero-Voltage-Switching Svm Controlled Three-Phase Grid Inverter

Loss Analysis and Measurement of ANPC Inverter Based on SiC & Si Hybrid Module

Loss Model and Efficiency Analysis of Tram Auxiliary Converter Based on a SiC Device

Power Loss Model and Device Sizing Optimization of Si/SiC Hybrid Switches

An SiC MOSFET & Si Diode Hybrid Three-Phase High-Power Three-level Rectifier

Precise Electro-thermal Power Loss Model of a Three-level ANPC Inverter with Hybrid Si/SiC Switches

Performance Evaluation of High-Power SiC MOSFET Modules in Comparison to Si IGBT Modules

A Quasi-Two-Level Medium-Voltage SiC MOSFET Power Module with Low Loss and Voltage Self-Balance

A Si IGBT/SiC MOSFET Hybrid Isolated Bidirectional DC–DC Converter for Reducing Losses and Costs of DC Solid State Transformer

Development of Auxiliary Converter Based on 1700V/325A Full SiC MOSFET for Urban Rail Transit Vehicles

Evaluation of Different Si/SiC Hybrid Three-Level Active NPC Inverters for High Power Density

Scenario Simulated Experimental Platform of Ac-Dc Hybrid Multi-Port Energy Router for Power Distribution Networks

A Si/SiC Hybrid Five-Level Active NPC Inverter With Improved Modulation Scheme

A Hybrid Cascaded Multilevel Converter Based on Si and SiC Devices and Its Regulation Optimization Strategy

A Sic Power Mosfet Loss Model Suitable for High-Frequency Applications

Design and Evaluation of a 1200-V/200-A SiC Three-Level NPC Power Module