Abstract:The performance of rigid pavement is greatly affected by the properties of the base/subbase and subgrade layer. However, the performance predicted by the AASHTOWare Pavement Mechanistic-Empirical (ME) Design shows low sensitivity to the properties of base and subgrade layers. In this study, a new set of modified models, that is, resilient modulus (MR) and modulus of subgrade reaction (k-value) are adopted to better reflect these layers’ influence on the overall performance. An artificial neural network (ANN) model is developed to predict the modified k-value based on finite element (FE) analysis. The training and validation data sets in the ANN model consist of 27,000 simulation cases with different combinations of pavement layer thickness, layer modulus, and slab-base interface bond ratio. Eight pavement section data are collected from the long-term pavement performance (LTPP) database and modeled using the FE software ISLAB2000 to evaluate the sensitivity of the modified MR model and k-values to pavement performance. The computational results indicate that the modified MR values have a higher sensitivity to water content in the base layer on fatigue cracking (bottom-up and top-down cracking) and the faulting performance of rigid pavements compared with the results using the Pavement ME design model. It is also observed that the k-values using the ANN model have a greater sensitivity to cracking and faulting performance as a result of changes in any bonded conditions (fully bonded, partially bonded, zero bonded), whereas the Pavement ME design model can only calculate at two extreme bonding conditions (i.e., fully bonded and zero bonded).

Pull-off Adhesion Prediction of Variable Thick Overlay to the Substrate

Development of an Artificial Neural Network-Based K-Value Prediction Model to Improve the Sensitivity of Base Layer on Rigid Pavement Performance

Prediction of Geogrid-Reinforced Flexible Pavement Performance Using Artificial Neural Network Approach

Use of an Artificial Neural Network Approach for the Prediction of Resilient Modulus for Unbound Granular Material

Assessing artificial neural network performance for predicting interlayer conditions and layer modulus of multi-layered flexible pavement

Prediction of Lap Shear Strength and Impact Peel Strength of Epoxy Adhesive by Machine Learning Approach

Inverse Identification of Cohesive Zone Parameters for Sintered Nano-Silver Joints Based on Dynamic Convolution Neural Network

Prediction of the Interface Shear Strength between Ultra-High-Performance Concrete and Normal Concrete Using Artificial Neural Networks

Predicting the fatigue life of asphalt concrete using neural networks

The Prediction of Adhesive Failure Between Aggregates and Asphalt Mastic Based on Aggregate Features

Prediction of Compressive Strength of Recycled Aggregate Concrete Using Artificial Neural Networks

Identification of the interfacial cohesive law parameters of FRP strips externally bonded to concrete using machine learning techniques

Predicting the Pullout Capacity of Small Ground Anchors Using Nonlinear Integrated Computing Techniques

Predicting the Workability of Self-Compacting Concrete Using Artificial Neural Network

Concrete compressive strength using artificial neural networks

Neural network models to predict explosive spalling of PP fiber reinforced concrete under heating

Prediction of Resilient Modulus Value of Cohesive and Non-Cohesive Soils Using Artificial Neural Network

A comparative study of ANN and ANFIS models for the prediction of cement-based mortar materials compressive strength

Application of Artificial Neural Networks in Predicting Abrasion Resistance of Solution Polymerized Styrene-Butadiene Rubber Based Composites

Prediction of Explosive Spalling of Heated Steel Fiber Reinforced Concrete Using Artificial Neural Networks

Artificial Neural Network-Based Evaluation of Layer Modulus of Asphalt Pavement