Abstract:Objectives Epoxy adhesives are advanced materials, but suffer from high brittleness and low toughness due to their high crosslinking degree, which limits their service life in structural applications. The lack of appropriate thermal stability at high temperatures is another constraint of epoxy adhesives. The main aim of this research was to increase the thermal stability and toughness of epoxy adhesives using phenolic resin, zinc oxide (ZnO) nanoparticles, and poly (butyl acrylate-block-styrene) copolymer as a toughening agent. Furthermore, the mechanical properties of epoxy adhesives were predicted by designing two feed-forward multilayer perceptron (MLP) networks. Methods Epoxy adhesives with different contents of phenolic resin (10, 20, and 30 phr), copolymer (1.25, 2.5, and 3.75 phr), and ZnO (0.5, 1, 2, and 5 phr) nanoparticles were synthesized under mechanical mixing by using xylene as solvent. Then, the epoxy adhesive samples for tensile and lap shear tests were cured at room temperature for 7 and 2 days, respectively. The mechanical properties of adhesive samples were measured by tensile and lap shear tests. The thermal stability of the epoxy adhesive samples was investigated by thermogravimetric analysis (TGA). The kinetics of the curing reaction of the optimum epoxy adhesive samples was also studied by differential scanning calorimetry (DSC). Results The toughness of epoxy adhesive containing 10 phr phenolic, 2.5 phr block copolymer, and 2 phr ZnO nanoparticles increased by 20%, and shear strength by 99% compared to pure epoxy adhesive, notifying a significant synergistic effect. The TGA results showed that all three mentioned additives have increased the thermal stability of pure epoxy. The highest thermal stability was observed for epoxy adhesive containing 2.5 phr block copolymer and 2 phr ZnO nanoparticles. In addition, DSC analysis proved the positive effect of ZnO nanoparticles incorporation and block copolymer on the curing kinetics of epoxy adhesive. Moreover, the predicted tensile strength, tensile modulus, toughness, and shear strength of epoxy adhesives by MLP networks showed a very good consistency between the experimental data and the model predictions (e.g., MRE < 1.1 for lap shear). Significance In the current study, the artificial neural networks (ANN) results showed that there was very good consistency between the ANN predictions and the experimental data.

Prediction of Lap Shear Strength and Impact Peel Strength of Epoxy Adhesive by Machine Learning Approach

Predicting the Properties of High-Performance Epoxy Resin by Machine Learning Using Molecular Dynamics Simulations

Proposing an Inherently Interpretable Machine Learning Model for Shear Strength Prediction of Reinforced Concrete Beams with Stirrups

Thermomechanical behavior of a novel hybrid epoxy/ZnO nanocomposite adhesive in structural bonding: Experimental analysis and ANN modeling

ANN prediction of mode I fracture energy in epoxy adhesive joints: Adherend, adhesive, and strain rate effects

Prediction of Adhesion Strength Using Extreme Learning Machine and Support Vector Regression Optimized with Genetic Algorithm

Artificial Neural Network Prediction of Effect of Voids on the Interlaminar Shear Strength of Carbon/epoxy Fabric Laminates

Prediction accuracy of Random Forest, XGBoost, LightGBM, and artificial neural network for shear resistance of post-installed anchors

Application of Artificial Neural Networks in Predicting Abrasion Resistance of Solution Polymerized Styrene-Butadiene Rubber Based Composites

Multi-Objective Optimization of Adhesive Joint Strength and Elastic Modulus of Adhesive Epoxy with Active Learning

Predicting fatigue life of automotive adhesive bonded joints: a data-driven approach using combined experimental and numerical datasets

Artificial Neural Networks in Prediction of Mechanical Behavior of High Performance Plastic Composites

Artificial Neural Network (Ann)-Based Residual Strength Prediction of Carbon Fibre Reinforced Composites (cfrcs) after Impact

Feature-based prediction of properties of cross-linked epoxy polymers by molecular dynamics and machine learning techniques

Machine Learning Algorithms for Prediction and Characterization of Cohesive Zone Parameters for Mixed-Mode Fracture

CFRP-RC fracture strength prediction: A novel approach using deep learning

Pull-off Adhesion Prediction of Variable Thick Overlay to the Substrate

Application of Neural Network Models with Ultra-Small Samples to Optimize the Ultrasonic Consolidation Parameters for 'PEI Adherend/Prepreg (CF-PEI Fabric)/PEI Adherend' Lap Joints

Acoustic Emission-Based Failure Load Prediction for Plain Woven Laminates under Quasi-Static Indentation

Machine learning/finite element analysis - A collaborative approach for predicting the axial impact response of adhesively bonded joints with unique sandwich composite adherends

Mechanical Properties Prediction of Composite Laminate with FEA and Machine Learning Coupled Method