Abstract:Particulate emission is one of the critical challenges for the modern gasoine direct injection (GDI) engines. Especially under cold start conditions, the global equivalence ratio inside the cylinder is often set quite rich, leading to the generation of a large amount of soot. The fuel distribution state, such as homogeneous mixing and heterogeneous mixing with local rich pockets prior to the combustion is the key factor affecting soot generation under cold start conditions in GDI engines. Flash boiling injection, as a method to promote fuel air mixing, could be a potential solution to sooting problems of rich mixture combustion under cold start conditions. However, the unclear influences of flash boiling spray to fuel–air mixing state and subsequent soot generation pose a challenge to soot reduction in GDI engines. This work aims to study the effect of various flash boiling degrees on fuel–air mixture formation and subsequent soot generation utilizing a customized constant volume combustion chamber (CVCC) incorporated with the gasoline direct injection scheme under moderately cold start ambient temperature of 30 °C. A global high equivalence ratio of 1.7 representing extremely rich combustions under cold start conditions is selected for strong sooting propensity. By setting different fuel temperatures ( T f = 30 °C and 120 °C) and various ambient pressures ( P a = 40 kPa, 100 kPa and 160 kPa), various spray flash boiling states (subcooled, transitional flash boiling and flare flash boiling sprays) are achieved, and finally various fuel distribution states of rich mixtures prior to combustion are obtained. High speed color camera and soot sampling TEM grids were used to capture and evaluate the characteristics of spray atomization, combustion and soot aggregate structures. Based on this investigation, the effect of flash boiling degree on fuel–air mixing and subsequent soot generation is analyzed. The results show that flash boiling spray enhances fuel atomization and produces much more homogeneous rich mixture with smaller local rich pockets and richer global premixed gaseous portion. Over-rich global premixed mixture combustion is prone to nuclei inception and agglomeration, producing soot aggregates with small primary particles. While the local rich pocket combustion is prone to surface growth, producing larger primary particles. Flash boiling spray could reduce the size of soot particles under cold start conditions by generating smaller local rich pockets.

Influence of Flash Boiling Spray on the Combustion Characteristics of a Spark-Ignition Direct-Injection Optical Engine under Cold Start

An Experimental Investigation of Early Flame Development in an Optical Spark Ignition Engine Fueled with Natural Gas

Effect of Flash Boiling on Microscopic and Macroscopic Spray Characteristics in Optical Gdi Engine

Significant Impact of Flash Boiling Spray on In-Cylinder Soot Formation and Oxidation Process

Impact of flash boiling spray on soot generation of a rich fuel–air mixture under various ambient pressures

The Influence of Flash Boiling Conditions on Spray Characteristics with Closely Coupled Split Injection Strategy

A morphological study of supercritical fuel flash-boiling spray

Microscopic Characterization of Isooctane Spray in the Near Field under Flash Boiling Condition

Near-field spray atomization characteristics at the end of injection under flash-boiling and non-flash-boiling conditions

Optical Study of Throttleless and EGR-controlled Stoichiometric Dual-Fuel Compression Ignition Combustion

Visualization on spray and flame characteristics of wall-impinging spray under marine diesel engine conditions

Multiple optical diagnostics on effects of fuel properties on spray flames under oxygen-enriched conditions

Investigation into Shock-to-shock Interactions Induced by Flash Boiling and the Impact on Spray Behaviors

Characteristics of Ethanol, Butanol, Iso-Octane and Gasoline Sprays and Combustion from a Multi-Hole Injector in a DISI Engine

Investigation of Injector Coking Effects on Spray Characteristic and Engine Performance in Gasoline Direct Injection Engines

Experimental investigation of flow field features and spark ignition process in a multi-swirl airblast injector

Experimental investigation on spark ignition and flame propagation of swirling kerosene spray flames

Experimental investigation of the ignition process in a separated dual-swirl spray flame

Experimental research on the effects of kerosene on the pre-injection spray characteristics and engine performance of dual-direct injection diesel Jet Controlled Compression Ignition mode

An Investigation of the Presence of Uncontrolled Combustion Phenomenon in Spark Ignition Single Cylinder Optical Engine

Analysis of the interaction of Spray G and in-cylinder flow in two optical engines for late gasoline direct injection