Abstract:It is well known that magnetic nanofluids are widely applied in various fields ranging from heat transfer to miniature cooling, and from damping to sealing, due to the mobility and magnetism under magnetic field. Herein, the PFPE-oil based magnetic nanofluids with superior magnetization and dispersion stability were obtained via regulating reaction temperature. The structures of particles were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The size effects of particles on the magnetism and coating effect of particles, and on the stability and saturation magnetization of the fluids were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM) and density instrument, respectively. The results indicate that the impurity phase FeOOH only appear in the sample prepared at 18°C and the average size of Fe 3 O 4 nanoparticles reduces from 120 to 20 nm with raising reaction temperature. The saturation magnetization of Fe 3 O 4 particles increases firstly and then reduces with increasing particle size, which is affected by the thickness of magnetic dead layer and impurity phase FeOOH. The Fe 3 O 4 particles could be chemically coated by PFPE-acids, and the coated mass is a little affected by particle size. The stability of the nanofluids lowers while the saturation magnetization increases firstly and then decrease with increasing particle size. At reaction temperature of 60°C, Fe 3 O 4 particles of 25 nm and the nanofluids with superior stability and saturation magnetization were obtained. Our results indicate that the control of nanoparticles size by regulating reaction temperature can be a useful strategy for preparing magnetic nanofluids with desirable properties for various potential applications.

Fabrication, Characterization, And Insulating Property Of Fe3o4 Nanofluids

Fabrication and Characterization of Organic-based Fe_3O_4 Magnetic Fluid

Preparation and Characterization of Solvent-Free Fe3o4 Nanofluids

Fabrication, Characterisation and Stability of Tio2 Nanofluids

1D Magnetic Materials of Fe 3 O 4 and Fe with High Performance of Microwave Absorption Fabricated by Electrospinning Method

Influence of Monodisperse Fe3O4 Nanoparticle Size on Electrical Properties of Vegetable Oil-Based Nanofluids

Solvothermal Synthesis and Magnetic Property of Monodispersed Fe_3O_4 Nano-powders

Ferromagnetic Fe3O4 Nanofibers: Electrospinning Synthesis and Characterization

Synthesis, Structure and Properties of Fe3O4 Nanofluids with Liquid–like Behavior

Dielectric Properties of Vegetable Oil Modified by Monodisperse Fe3O4 Nanoparticles

Preparation and breakdown strength of Fe3O4 nanofluid based on transformer oil

Controlled Synthesis And Size-Dependent Thermal Conductivity Of Fe3o4 Magnetic Nanofluids

Force Analysis and Distribution Evolution of Fe3O4 Nanoparticles in Magnetic Fluids

Experimental investigation of zinc ferrite/insulation oil nanofluid natural convection heat transfer, AC dielectric breakdown voltage, and thermophysical properties

Size Effect of Fe3O4 Nanoparticles on Magnetism and Dispersion Stability of Magnetic Nanofluid

Synthesis Structure and Properties of Fe3O4 Nanofluids with Liquid-like Behavior

Stability and Photothermal Properties of Fe3O4-H2O Magnetic Nanofluids

Study on the Fluidity Experiments of Engine Oil-Based Magnetic Fluid with Fe3O4/Ag Nanoparticles

Synthesis and Characterization of Fe3O4 Nanoparticles by a Solvothermal Method

Production and characterization of CuNiZnFe2O4 dispersed transformer and kerosene oil based magnetic nanofluids for heat transfer applications

Study on the stability and viscosity of Fe3O4 nano-particles vegetable insulating oils