Abstract:Self-deployable structures based on shape memory polymer composites (SMPCs) have the capability of self-deploy, light weight and high load-bearing. This paper presents the detail of an integrative hinge fabricated by carbon fiber reinforced shape memory epoxy composites in the sequence of material selection, structure design and manufacture, material and structure experiments, and application. DMA experiments have been conducted to figure out the temperature sensitivity of SMP. The temperature dependent elastic modulus and strength of SMPC were determined by tensile experiments. Results from three point bending tests and shape memory recovery tests verify the variable stiffness of the integrate SMPC hinge under different temperatures and superior shape memory properties. Strain distribution during bending process are obtained from both digital image correlation (DIC) measurements and ABAQUS simulation, showing good consistency with each other. To compare the modal characteristics with traditional SMPC hinge, modal testing and computation have been designed with free boundary condition. It can be found that the integrative SMPC hinges have the characteristics of improved reliability and performance, and higher post-deployment stiffness and strength, when compared to traditional SMPC hinges. Finally, prospective applications of the self-deployable structure have also been illustrated.

The mechanical design of a hybrid intelligent hinge with shape memory polymer and spring sheet

Design And Optimization Of Flexure Hinges

Force Transfer Mechanism of the Hinge Joint of Multi-Adjacent Hollow Slab Precast Bridge

A Kirigami Shape Memory Polymer Honeycomb Concept for Deployment

Parametric Solid Modeling of Flexure Hinge Mechanism Based on APDL

Integrative hinge based on shape memory polymer composites: Material, design, properties and application

Finite Element Analysis of Displacement Performances of Flexure Hinge Mechanism Affected by Machining Errors

The Mechanical Behavior of the Double Piece of Tape Spring

Parametric Finite Element Analysis Of Output Displacement Affected By Machining Errors Of Flexure Hinge Mechanism

Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator

Design Theory and Dynamic Mechanical Characterization of the Deployable Composite Tube Hinge

Design and Analysis of Tape Hinge for Deployable Structures

Theoretical Modeling and Experimental Verification of Elliptical Hyperbolic Hybrid Flexure Hinges

A Compact Three-Dimensional Two-Layer Flexible Hinge

Research On Design Method Of Flexure Hinge

Design of bending for the SMA hybrid composites

Generalized Model and Configuration Design of Multiple-Axis Flexure Hinges

Design Of Single-Dof Micro-Displacement Flexure Hinge Mechanism Actuated By Pzt

Design and modelling of a reversible shape memory alloy torsion hinge actuator

Multi-objective optimisation designs for thin-walled deployable composite hinges using surrogate models and Genetic Algorithms

Influence of printing parameters and hinge structure on shape memory performance at the hinge in 4D origami structures