Abstract:Ammonia is a carbon-free hydrogen carrier, and development of non-noble metal catalyst to decompose ammonia into hydrogen is desirable for practical applications. However, the metal catalyst is challenged by the sintering of metal particles under high-temperature reaction conditions. In this study, a series of Li-, Al-, and Co-containing hydrotalcite-like compounds (HTlc) were synthesized by co-precipitation and used as precursors to prepare well-dispersed and thermally stable Co nanoparticle catalysts for ammonia decomposition. The obtained precursors and catalysts were characterized by means of X-ray powder diffraction (XRD), temperature-programmed reduction (H 2 -TPR), X-ray photoelectron spectroscopy (XPS), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), and so on. All of the precursors formed hydrotalcite-like phase, which consisted of Li–Al–(Co) HTlc and/or Co–Al HTlc dependent on the Co content. Upon calcination at 500 °C, HTlc decomposed into an Al-substituted Co 3 O 4 spinel oxide, as confirmed by two distinctly separated reduction steps in H 2 -TPR. Following reduction at 700 °C, well-dispersed Co metal nanoparticles with an average particle size of ∼9.2–12.4 nm were obtained. It was suggested that the incorporation of Al 3+ into Co 3 O 4 led to a strong interaction between cobalt and aluminum, which suppressed the crystal growth of Co 3 O 4 and the sintering of Co metal during the thermal treatments, resulting in good Co dispersion. The optimal LiAlCo(1.5) catalyst showed superior activity than that prepared by impregnation method, giving almost complete conversion of ammonia at 575 °C under a space velocity of 5,000 mL g cat –1 h –1 . More importantly, this catalyst maintained stable activity at 625 °C for 100 h, exhibiting high stability and sintering resistance. The good catalytic performance was attributed to the high Co metal dispersion and strong metal–support interaction benefiting from the uniform distribution of cobalt in the HTlc precursor. These results demonstrate the applicability of HTlc to the preparation of metal catalysts with improved dispersion and thermal stability.

Embedded iron nanoparticles by graphitized carbon as highly active yet stable catalyst for ammonia decomposition

Direct Synthesis of Ammonia from N 2 and H 2 O on Different Iron Species Supported on Carbon Nanotubes Using a Gas‐Phase Electrocatalytic Flow Reactor

Enhanced Performance in the Direct Electrocatalytic Synthesis of Ammonia from N 2 and H 2 O by an in -Situ Electrochemical Activation of CNT-supported Iron Oxide Nanoparticles ?

Core-shell structured iron nanoparticles for the generation of COx-free hydrogen via ammonia decomposition

Highly Efficient K-Fe/C Catalysts Derived from Metal-Organic Frameworks Towards Ammonia Synthesis

Methane decomposition to produce hydrogen and carbon nanomaterials over costless, iron-containing catalysts

Implication of iron nitride species to enhance the catalytic activity and stability of carbon nanotubes supported Fe catalysts for carbon-free hydrogen production via low-temperature ammonia decomposition

Graphene-supported Iron-Based Nanoparticles Encapsulated in Nitrogen-Doped Carbon As a Synergistic Catalyst for Hydrogen Evolution and Oxygen Reduction Reactions.

Highly dispersed Pt boosts active Fe N formation in ammonia decomposition

Cs-modified iron nanoparticles encapsulated in microporous and mesoporous SiO2 for COx-free H2 production via ammonia decomposition

N-doped Carbon–iron Heterointerfaces for Boosted Electrocatalytic Active and Selective Ammonia Production

Carbon nanotubes containing iron and molybdenum particles as a catalyst for methane decomposition

Active nitrogen sites on nitrogen doped carbon for highly efficient associative ammonia decomposition

Core-shell structured Fe 3 C as high-performance catalyst for methane decomposition

Iron-Single Sites Confined by Graphene Lattice for Ammonia Synthesis under Mild Conditions

Deposition of Fe-Ni nanoparticles on polyethyleneimine-decorated graphene oxide and application in catalytic dehydrogenation of ammonia borane

In Situ Hydrothermal Deposition As an Efficient Catalyst Supporting Method Towards Low-Temperature Graphitization of Amorphous Carbon

Highly loaded bimetallic iron-cobalt catalysts for hydrogen release from ammonia

Activation of Fe species on graphitic carbon nitride nanotubes for efficient photocatalytic ammonia synthesis

Hydrotalcite-derived well-dispersed and thermally stable cobalt nanoparticle catalyst for ammonia decomposition

Dynamic Reconstruction of Yttrium Oxide‐Stabilized Cobalt‐Loaded Carbon‐Based Catalysts During Thermal Ammonia Decomposition