Abstract:Purpose – Rock-fill dams are embankments of compacted free-draining granular earth containing an impervious zone. Earth utilized in such dams often contains a high percentage of large particles – hence the term rock-fill. Mass stability of these dams results from friction and particle interactions rather than through a cementing agent binding the particles together. However, high-stress conditions and prolonged exposure to the elements can severely damage rock-fill. Therefore, understanding and modeling rock-fill breakage is important for dam engineering. The purpose of this paper is to improve discontinuous deformation analysis (DDA) techniques for modeling rock-fill breakage, proving the new method using simulations of spherical particle crushing. Design/methodology/approach – This work models rock-fill as bonded ellipsoid particles, and develops an improved DDA method to model the breakage of particle assemblies. The paper starts by describing the principles of three-dimensional DDA for spherical particles, and then derives the submatrices for normal contact, shear contact, and frictional force. The new algorithm incorporates a bond model with a revised open-close iteration algorithm into the DDA method to simulate particle crushing. To validate the improved DDA method, calculated particle contacts and movements are validated against theoretical results. Finally, this work performs a series of point-loading experimental tests for cement ellipsoid particles of both high and low compression strengths, with the test results compared against the results from corresponding DDA simulations. Findings – In particle crushing tests, the force and displacement show an approximately linear relationship until the crushing point, at which point low compression ellipsoid particles split into several large pieces while the high-compression particles break into many small fragments. The DDA simulation results are in good agreement with the crushing tests, demonstrating the validity of the DDA method for solving particle crushing problems. Although the improved DDA model is applicable to rock-fill particle crushing studies, some issues remain, particularly in increasing calculation efficiency and performing large-scale computations and long real-time simulations. Future research should address these issues. Originality/value – A bond model with a revised open-close iteration algorithm is incorporated into the DDA method. The simulated results shed insight into rock-fill crushing mechanisms, an element of concern in engineering practices.

Model of Sphere-to-Edge Contact for Spherical Discontinuous Deformation Analysis

Improvement of Contact Calculation in Spherical Discontinuous Deformation Analysis

Study of discrete element model for non-sphere particles base on super-quadrics

Discontinuous Deformation Analysis for Ellipsoids Using Cone Complementary Formulation

Three-Dimensional Spherical Dda Method for Modeling Friction Problems

Dynamics Analysis of Spatial Mechanisms with Dry Spherical Joints with Clearance Using Finite Particle Method

Development of Discontinuous Deformation Analysis with Displacement-Dependent Interface Shear Strength

Extended DDA with Rotation Remedies and Cohesive Crack Model for Simulation of the Dynamic Seismic Landslide

Multi-scale simulation method with coupled finite/discrete element model and its application

Angle-Based Contact Detection in Discontinuous Deformation Analysis

Discrete Element Simulation of Cylindrical Particles Using Super-Ellipsoids

A deformable spheropolygon-based discrete element method

Investigation of Modeling Non-Spherical Particles by Using Spherical Discrete Element Model with Rolling Friction

Explicit time integration based spherical DDA calculation method

Object-Oriented Contact Detection Approach for Three-Dimensional Discontinuous Deformation Analysis Based on Entrance Block Theory

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

DEM Contact Model for Spherical and Polyhedral Particles Based on Energy Conservation

Remedies for Distortion and False Volume Expansion Problems with Large Rotation in Discontinuous Deformation Analysis

Particle Crushing Simulations with Improved Discontinuous Deformation Analysis

Three-dimensional discontinuous deformation analysis derived from the virtual work principle with a simplex integral on the boundary

An Improved Three-Dimensional Spherical DDA Model for Simulating Rock Failure