Abstract:Fluidization is widely used in industries and has been extensively studied, either experimentally or theoretically, in the past decades. In recent years, a coupled simulation approach of discrete element method (DEM) and computational fluid dynamics (CFD) has been successfully developed to study the gas–solid flow and heat transfer in fluidization at a particle scale. However, to date, such studies mainly deal with spherical particles. The effect of particle shape on fluidization is recognized but not properly quantified. In this paper, the CFD–DEM approach is extended to consider the fluidization of ellipsoidal particles. In the simulation, particles used are either oblate or prolate, with aspect ratios varying from very flat (aspect ratio=0.25) to elongated (aspect ratio=3.5), representing cylinder-type and disk-type shaped particles, respectively. The commonly used correlations to determine the fluid drag force acting on a non-spherical particle are compared first. Then the model is verified in terms of solid flow patterns. The effect of aspect ratio on the flow pattern, the relationship between pressure drop and gas superficial velocity, and microscopic parameters such as coordination number, particle orientation and force structure are investigated. It is shown that particle shape affects bed permeability and the minimum fluidization velocity significantly. The coordination number generally increases with aspect ratio deviating from 1.0. The analysis of particle orientations shows that the bed structures for ellipsoids are not random as that for spheres. Oblate particles prefer facing upward or downward while prolate particles prefer horizontal orientation. Spheres have the largest particle–particle contact force and fluid drag force under the comparable conditions. With aspect ratio deviating from 1.0, particle–particle interaction and fluid drag become relatively weak. The proposed model shows a promising method in examining the effect of particle shape on different flow behaviour in gas fluidization.

Discrete Element Simulation of Cylindrical Particles Using Super-Ellipsoids

Multi-super-ellipsoid model for non-spherical particles in DEM simulation

Discrete element modeling and simulation of non-spherical particles using polyhedrons and super-ellipsoids

An Approach to Distribute the Marker Points on Non-Spherical Particle/boundary Surface Within the IBM-LBM Framework

Multi-level DEM study on silo discharge behaviors of non-spherical particles

Study of discrete element model for non-sphere particles base on super-quadrics

Discrete element simulation of super-ellipse systems

Reliability Study of Super-Ellipsoid DEM in Representing the Packing Structure of Blast Furnace

Discrete Particle Simulation of Gas Fluidization of Ellipsoidal Particles

Comparative Study of Discrete Element Modeling of Tablets Using Multi-Spheres, Multi-Super-ellipsoids, and Polyhedrons

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

Packing of Cylindrical Particles: DEM Simulations and Experimental Measurements

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

Investigation of Modeling Non-Spherical Particles by Using Spherical Discrete Element Model with Rolling Friction

Discrete Modelling of the Packing of Ellipsoidal Particles

Evaluation of Contact Force Models for Discrete Modelling of Ellipsoidal Particles

Super-quadric CFD-DEM-VOF Modelling of Gas–solid-Liquid Systems

DEM simulation of the packing of cylindrical particles

Comparison of Construction Method for Dem Simulation of Ellipsoidal Particles

Direct numerical simulation of rotating ellipsoidal particles using moving nonconforming Schwarz-spectral element method

Poly-superquadric Model for DEM Simulations of Asymmetrically Shaped Particles