Investigation of the Filtration Efficiency of HEPA and ULPA Filters in Submicron Particle Size Range

M Jamriska,D Martin,Lidia Morawska

1997-01-01

Abstract:High efficiency particulate (HEPA) and ultra low penetration air filters (ULPA) have been used as filtration devices for more than fifty years. Their high efficiency makes them suitable for application in areas where clean room conditions or contamination control is required. This paper presents the results of a performance evaluation of HEPA and ULPA filters used at the Australian Animal Health Laboratory, Geelong, Victoria. A detailed description of the experimental system, test procedure, and measuring techniques is provided. HEPA and ULPA filter efficiencies were measured for both types of filters in single and tandem configurations, and for different airflow conditions. Particle counting technique and sodium flame method were applied, and the sensitivity of both techniques compared. The performance of a damaged HEPA filter was also investigated. The integrated efficiency of a HEPA filter, challenged with dry polydisperse NaCl aerosols of count median diameter 60 nm, at a flow rate of 472 L s-1 was approximately 99.999957%. For an ULPA filter, tested under the same conditions, the efficiency was two orders of magnitude higher at 99.9999990%. The penetration through a HEPA and ULPA filter in tandem was one quarter that of an ULPA filter and less than one two hundredth that of a HEPA filter.