Abstract:Porous carbon materials have emerged as a new technology with tremendous potential as energy-saving and environmentally friendly pathways for SO2 removal due to its advantages, which include recyclability and a high adsorption capacity. However, the degradation of the performance of adsorbents using thermal regeneration has become a key issue limiting the scaling-up of this new technology. The main purpose of this study is to clarify the effect of the regeneration temperature on the physicochemical properties of activated coke and secondary SO2 removal performance, as well as explore the mechanism by which the circulating adsorbent is deactivated. Using powdered activated coke (PAC) prepared from coal. Experimental results show that adsorbed SO2 desorbs at temperatures between 200 and 500 ℃, while both excess CO2 and CO are released over a wide temperature range owing to the regeneration reaction and decomposition of newly formed oxygen-containing functional groups. The physicochemical properties of PAC are significantly affected by the regeneration temperature. As this temperature rises, the adsorbed sulfuric acid in the pores evaporates and the functional groups decompose, producing several micropores and a large specific surface area. Moreover, the SO2 adsorption–desorption process increases the number of C–O groups such that the active adsorption sites are occupied and SO2 adsorption is prevented. The C-O groups decompose to produce CO2 when exposed to even higher temperatures. The secondary SO2 adsorption experiment demonstrated that the ability of the adsorbent to perform desulfurization could be recovered completely by controlling the regeneration temperature.

Regeneration Behavior of Tin Oxide Sorbent for Warm Syngas Desulfurization

Steam Regenerative Removal of Hydrogen Sulfide from Hot Syngas by a Novel Tin Oxide and Yttrium Oxide Sorbent

Sorption-Enhanced Steam Reforming of Glycerol for Hydrogen Production over a NiO/NiAl2O4 Catalyst and Li2ZrO3-Based Sorbent

Kinetic Study on the Sulfidation and Regeneration of Manganese-Based Regenerable Sorbent for High Temperature H2S Removal

Regenerable Co-ZnO-based Nanocomposites for High-Temperature Syngas Desulfurization

Regeneration characteristics and kinetics of Fe2O3/lignite semi-coke hot gas desulfurizer at O2/N2 atmosphere

The Regeneration Effect of H2SO4 on V-W-TiO2 SCR Catalyst Deactivated by Alkali Metal

Enhanced Desulfurization by Tannin Extract Absorption Assisted by Binuclear Sulfonated Phthalocyanine Cobalt Polymer: Performance and Mechanism

Dry Reforming of Model Biogas on a Ni/SiO2 Catalyst: Overall Performance and Mechanisms of Sulfur Poisoning and Regeneration

Deactivation Model Study of High Temperature H2S Wet-Desulfurization by Using ZnO

Simultaneous Removal of COS and H2S from Hot Syngas by Rare Earth Metal-Doped SnO2 Sorbents

Thermal Regeneration of Active Carbon Desulfurizer

Study on thermal regeneration of saturated activated coke coupled with SO2 carbothermal reduction to produce elemental sulfur

Insights into the effect of regeneration temperature on physicochemical properties and SO2 removal over powdered activated coke

A Study of High Temperature Desulfurization and Regeneration Using Iron-Calcium Oxides in a Fixed-Bed Reactor

A regenerable oxide-based H2S adsorbent with nanofibrous morphology

Desulfurization Behavior of Fe–Mn-Based Regenerable Sorbents for High-Temperature H2S Removal

Experimental Investigation on Sulfur Transformation During Coal Steam Gasification with Ca-based Absorbent

Experimental Study on Desulfurization Performance of Hot Gas at Medium and High Temperature

Removal of sulfur at high temperatures using iron-based sorbents supported on fine coal ash

Steam Methane Reforming Reaction Enhanced by a Novel K2CO3-Doped Li4SiO4 Sorbent: Investigations on the Sorbent and Catalyst Coupling Behaviors and Sorbent Regeneration Strategy