Abstract:A facile way to fabricate highly efficient organic light emitting devices (OLEDs) with insulator MnO as an electron injecting and transporting material was devised, which eliminates the problem of the oxidation of reactive dopants. The power efficiency of 1.1 lm/W by inserting 3-nm-thick MnO as the electron injecting layer was obtained, higher than the 0.8 lm/W efficiency for the reference device with 0.5-nm-thick LiF. A thermal co-evaporation layer containing 10% weight of MnO and tris(8-hydroxyquinolato) aluminum (Alq(3)) as the electron transporting layer showed more efficient electron transport ability, with turn-on voltage of 3.8 V, lower than 7.4 V for the intrinsic Alq3. Meanwhile, the insertion of thin MnO layer between organic photoactive layer and inorganic metal electrode significantly improved performance and stability of organic solar cell compared to device without it. The power conversion efficiency (PCE) of 2.91% by inserting 3-nm-thick MnO was obtained, higher than the 0.91% efficiency for the device without it, and 2.59% for the device with 0.5-nm-thick LiF. Charge transport of rhenium trioxide (ReO3) in organic electronic devices was investigated. The hole injection/transport was blocked and the electron injection/transport was enhanced with doping of ReO3 in organic electronic devices. Thus the charge balance and efficiency of the OLED were improved, 2.7 cd/A of current efficiency (CE) at 20 mA/cm(2) for the device with ReO3 was higher than 1.5 cd/A for the device without it. In the case of organic photovoltaic cells (OPV), the open-circuit voltage (V-oc), 0.58 V, was higher compared to the device without ReO3 (0.44 V) due to the improvement of interface properties. The PCE was increased to 2.27% by the combination of ReO3 (increasing V-oc) with poly(3,4-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) (improve hole transport to increase J(sc)) on the modification of the anode, higher than 1.85% for the device without ReO3.

Highly Efficient Charge Generation and Electron Injection of M-Mtdata/m-mtdata:Hat-cn/hat-cn Organic Heterojunction on ITO Cathode for High Efficiency Inverted White Organic Light-Emitting Diodes

Properties of Highly Efficient Charge Generation and Transport of Multialternating Organic Heterojunctions and Its Application in Organic Light-Emitting Diodes

Highly Efficient Charge Generation and Injection in HAT-CN/TAPC Heterojunction for High Efficiency Tandem Organic Light-Emitting Diodes

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

High Efficiency WOLEDs with Low-Voltage and High Carriers Balance

Highly Efficient Tandem White Organic Light-Emitting Diodes Based Upon C60/NaT4 Organic Heterojunction As Charge Generation Layer

Efficient inverted organic light-emitting devices using a charge-generation unit as electron-injection layers

High Efficiency Organic Light-Emitting Diodes Based on HAT-CN/TAPC Heterojunction Charge Generation Layer As Charge Injectors

Highly efficient homojunction organic light-emitting diodes

Improved Performance of Hybrid Organic/Inorganic P–n Heterojunction White Light‐Emitting Diodes with 4,4′‐cyclohexane‐1,1‐diylbis[ N , N ‐bis(4‐methylphenyl)aniline] As a Multifunctional Hole Transport Layer

Investigation and Optimization of Each Organic Layer: A Simple but Effective Approach Towards Achieving High-Efficiency Hybrid White Organic Light-Emitting Diodes

High Colour Rendering Index White Organic Light-Emitting Devices with Three Emitting Layers

Fabrication and Spectra Characteristics of High Efficiency White Organic Light-Emitting Diodes with Single Emitting Layer

Highly efficient red, green, and blue inverted top‐emitting organic light‐emitting diodes with microstructured TiN substrate

N-Type Doping in Organic Electronic Devices

Peformance Enhancement Of Organic Light-Emitting Diodes Based On Different Hole Transport Layers

C70/Pentacene Organic Heterojunction As Charge Generator to Realize Highly Efficient Charge Carrier Injection in Organic Light‐Emitting Diodes: Performance and Mechanism Analysis

Inverted device architecture for high efficiency single-layer organic light-emitting diodes with imbalanced charge transport

Highly Efficient Tandem OLED Based on a Novel Charge Generation Layer of HAT-CN/CuPc Heterojunction

Simplified Dopant-Free Color-Tunable Organic Light-Emitting Diodes

Efficiency Improvement Of Yellow Organic Light-Emitting Devices By Using Mixed Hole Transporting Layer