Abstract:Silicon is regarded as one of the most promising next generation lithium-ion battery anodes due to its exceptional theoretical capacity, appropriate voltage profile, and vast abundance. Nevertheless, huge volume expansion and drastic stress generated upon lithiation cause poor cyclic stability. It has been one of the central issues to improve cyclic performance of silicon-based lithium-ion battery anodes. Constructing hierarchical macro-/mesoporous silicon with a tunable pore size and wall thickness is developed to tackle this issue. Rational structure design, controllable synthesis, and theoretical mechanical simulation are combined together to reveal fundamental mechanisms responsible for an improved cyclic performance. A self-templating strategy is applied using Stöber silica particles as a templating agent and precursor coupled with a magnesiothermic reduction process. Systematic variation of the magnesiothermic reduction time allows good control over the structures of the porous silicon. Finite element mechanical simulations on the porous silicon show that an increased pore size and a reduced wall thickness generate less mechanical stress in average along with an extended lithiation state. Besides the mechanical stress, the evolution of strain and displacement of the porous silicon is also elaborated with the finite element simulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12747?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12747</a>.SEM, TEM, and HRTEM images and the SAED pattern of the pristine SiO<sub>2</sub>; SEM images, XRD patterns, HRTEM images, SAED patterns, N<sub>2</sub> adsorption and desorption isotherms, and the corresponding BJH pore size distribution curves of the porous silicon; cyclic voltammetry curves and Galvanostatic discharge/charge profiles of the porous silicon; stress, strain, and displacement distribution of the porous silicon calculated with the model structures III and IV along with increasing volume change ratios (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12747/suppl_file/am0c12747_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Strategy to Form Homogeneously Macroporous Si As Enhanced Anode Material of Li-ion Batteries

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

In Situ Synthesis of Carbon Doped Porous Silicon Nanocomposites As High-Performance Anodes for Lithium-Ion Batteries.

Rational Design of Three-Dimensional Macroporous Silicon As High Performance Li-ion Battery Anodes with Long Cycle Life

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Milled-Si@C Composites As Potential Anode Materials for Li- Ion Batteries

High-Temperature Magnesiothermic Reduction Enables HF-Free Synthesis of Porous Silicon with Enhanced Performance as Lithium-Ion Battery Anode

Optimized Porous Si/SiC Composite Spheres As High-Performance Anode Material for Lithium-Ion Batteries

Pre-lithiation synergized with magnesiothermic reduction to enhance the performance of SiO anode for advanced lithium-ion batteries

Controllable self-assembled mesoporous silicon nanocrystals framework as anode material for Li-ion battery

A Stable Nanoporous Silicon Anode Prepared by Modified Magnesiothermic Reactions

Zn-assisted Magnesiothermic Reduction for the Preparation of Ultra-Fine Silicon Nanocrystals for Lithium Ion Batteries

Simultaneous Purification and Perforation of Low-Grade Si Sources for Lithium-Ion Battery Anode.

Multi-step low-cost synthesis of ultrafine silicon porous structures for high-reversible lithium-ion battery anodes

A Novel Approach to Synthesize Micrometer-Sized Porous Silicon As a High Performance Anode for Lithium-Ion Batteries

Design and Construction of Porous Silicon Materials As Stable Anodes for Lithium-Ion Batteries

Mechanisms and Product Options of Magnesiothermic Reduction of Silica to Silicon for Lithium-Ion Battery Applications

Graphene-encapsulated blackberry-like porous silicon nanospheres prepared by modest magnesiothermic reduction for high-performance lithium-ion battery anode

Rational Design and Mechanical Understanding of Three-Dimensional Macro-/Mesoporous Silicon Lithium-Ion Battery Anodes with a Tunable Pore Size and Wall Thickness

Metallurgy of aluminum-inspired formation of aluminosilicate-coated nanosilicon for lithium-ion battery anode

Solution synthesis of porous silicon particles as an anode material for lithium ion batteries.