Abstract:Metal oxide nanofillers are a special type of additives in rubber composites that impart special qualities such as thermal resistance, tensile strength, electrical conductivity and heat capacity to rubbers. The heat conductivity of metal oxide through the rubber matrix reduces the vulcanization time of the rubber nanocomposites. Hence, the present work focused on the enhancement of these properties in natural rubber (NR) using zinc ferrite (ZnFe2O4) nanoparticles were prepared by a simple two-roll mill mixing technique. Structure, morphology, crystalline nature, cure characteristics, swelling, thermal and mechanical properties of the NR composites containing ZnFe2O4 were analysed in detail. FTIR and UV analysis proved the interaction of zinc ferrite with the macromolecular chain of NR. The XRD patterns of composite films revealed a decrease in amorphousness of NR with well-dispersed crystalline peaks of nanoparticles in the polymer. SEM images evidenced the morphological changes caused by dispersing zinc ferrite in the NR matrix. TEM analysis showed the uniform attachment of nanoparticles in the polymer. Glass transition temperature obtained from DSC was improved with the addition of zinc ferrite. The results from TGA showed that the presence of ZnFe2O4 in the polymer matrix greatly increases the thermal stability of NR. The metal oxide nanofiller significantly reduced the cure and scorch time of the NR composites. The mechanical properties of rubber nanocomposites showed that the addition of ZnFe2O4 improved their modulus, tensile strength, hardness, abrasion resistance and heat build-up, whereas the elongation at break and resilience decreases. The permeation and diffusion of nanocomposites were observed to be diminished with the size of penetrating solvents and also with the loading of filler. Overall, zinc ferrite nanoparticles could be used as a potential filler for improving the processability, mechanical strength, thermal stability and solvent resistance of natural rubber.

Preparation of a Natural Rubber Nanocomposite Coating Based on Fe3O4@Carbon Materials and Their Corrosion Resistance

Wear and anticorrosive properties of graphene oxide-cellulose nanofiber composite coatings

A green and facile fabrication of rGO/FEVE nanocomposite coating for anti-corrosion application

Preparation and Characterization of Graphene Oxide/Carbon Nanotube/Polyaniline Composite and Conductive and Anticorrosive Properties of Its Waterborne Epoxy Composite Coatings

Preparation and Tribological Properties of the Carbon Nanotubes–ni–p Composite Coating

Preparation of a natural rubber with high thermal conductivity, low heat generation and strong interfacial interaction by using NS-modified graphene oxide

Ultra‐Low Loading of Ultra‐Small Fe3O4 Nanoparticles on Nonmodified CNTs to Improve Green EMI Shielding Capability of Rubber Composites

Enhanced Fatigue and Durability Properties of Natural Rubber Composites Reinforced with Carbon Nanotubes and Graphene Oxide

Prominently enhanced corrosive gas NO2 resistibility for silicone rubber composite coatings by incorporation of functional g-C3N4 nanosheets

Natural rubber composites filled with zinc ferrite nanoparticles: focus on structural, morphological, curing, thermal and mechanical properties

Enhanced Corrosion Resistance of Waterborne Epoxy Coatings by Polyaniline Nanorods and Nitrogen and Fluorine Dual-Doped Graphene Oxide Composites

Silicone and Nano-Diamond Modified Graphene Oxide Anticorrosive Coating

Influence of the Dispersion of Carbon Nanotubes on the Electrical Conductivity, Adhesion Strength, and Corrosion Resistance of Waterborne Polyurethane Composites

Enhancement of adhesion, mechanical strength and anti-corrosion by multilayer superhydrophobic coating embedded electroactive PANI/CNF nanocomposite

Influence of Partial Substitution for Carbon Black with Graphene Oxide on Dynamic Properties of Natural Rubber Composites

Nano-sulfur Decorated Graphene Oxide to Improve the Mechanical Properties of Natural Rubber by Interfacial Participate in the Vulcanization Reaction

Preparation and Performance Studies of Modified Graphene Oxide/polyaniline Composite Anticorrosive Coatings

Research on the Preparation and Anticorrosion Properties of EP/CeO2-GO Nanocomposite Coating

Construction of fluorinated graphene/cerium oxide composite coatings using ethylenediamine as the covalent interface adhesive: Lubrication and anticorrosion performances

Constructing non-covalently assembled g-C3N4@GO nanofillers to enhance the anti-corrosion performance of waterborne epoxy coatings

Achieving superior anticorrosion and antibiofouling performance of polyaniline/graphitic carbon nitride composite coating