Abstract:To better understand and mathematically express the process of osmotic microbial fuel cells (OsMFCs), a model describing the integration of electrogen growth kinetics and osmotic mass transfer was developed and validated in this study. Low root mean square error (RMSE) and mean relative error (MRE) were obtained for simulated water flux, voltage generation, and chemical oxygen demand (COD) removal, which revealed a reasonable accuracy of the developed model. The local sensitivity analysis indicated that operating parameters such as draw solution concentration, anode hydraulic retention time (HRT) and influent COD concentration played important roles in influencing the key performance of OsMFCs. At the benchmark settings of anode HRT (4 h), influent COD (880 mg L-1), and external resistance (3000 Omega), a voltage increment of approximately 9.4% was predicted with an increased draw solution concentration from similar to 0 to 3.0 mol L-1 (sodium chloride, NaCl), revealing the merit brought by the combined effects of water flux-facilitated proton advection and the high conductivities of electrolytes in OsMFCs. Shortening the anode HRT from 14 to 0.5 h at a fixed draw solution concentration of 0.5 mol L-1 was able to achieve approximately 9.3% increment in voltage output, whereas, the COD removal compromised from 99.2% to less than 20%. High COD removal rate of over 95% was obtained when the examined influent COD was as low as approximately 300 mg L-1. The optimization of combined parameters indicated that the optimized operation was at a draw solution concentration of similar to 1.0 mol L-1 (NaCl), anode HRT ranging between 4 and 8 h, and a low influent COD of similar to 300 mg L-1 at the model settings.

Sustainable operation of osmotic microbial fuel cells through effective reproduction of polyelectrolyte draw solutes facilitated by cathodic pH increase

Facilitating proton transport by endowing forward osmosis membrane with proton conductive sites in osmotic microbial fuel cell

Waste Activated Sludge Treatment in an Osmotic Microbial Fuel Cell (Osmfc)

Integrating Microbial Fuel Cells with Anaerobic Acidification and Forward Osmosis Membrane for Enhancing Bio-Electricity and Water Recovery from Low-Strength Wastewater.

Membrane Cleaning and Performance Insight of Osmotic Microbial Fuel Cell.

Bioelectrochemically Assisted Osmotic Membrane Bioreactor with Reusable Polyelectrolyte Draw Solutes.

Simultaneous Wastewater Treatment and Resources Recovery by Forward Osmosis Coupled with Microbial Fuel Cell: A Review

Bioelectricity Generation Through Microbial Fuel Cell Using Organic Matters Recovered from Municipal Wastewater

Prediction and Optimization of the Performance in an Osmotic Microbial Fuel Cell for Water Purification and Bioelectricity Production Using a Developed Process Model

Permeability Recovery of Fouled Forward Osmosis Membranes by Chemical Cleaning During a Long-Term Operation of Anaerobic Osmotic Membrane Bioreactors Treating Low-Strength Wastewater

Study on the Changes in the Microcosmic Environment in Forward Osmosis Membranes to Reduce Membrane Resistance

Insights into Enhanced Current Generation of an Osmotic Microbial Fuel Cell under Membrane Fouling Condition

Development of Microbial Fuel Cell with Anoxic/Oxic Design for Treatment of Saline Seafood Wastewater and Biological Electricity Generation

Enhancement of Pollutants Removal from Real Sewage by Embedding Microbial Fuel Cell in Anaerobic–anoxic–oxic Wastewater Treatment Process

PPy/AQS (9, 10-anthraquinone-2-sulfonic acid) and PPy/ARS (Alizarin Red's) modified stainless steel mesh as cathode membrane in an integrated MBR/MFC system

Low pH, high salinity: Too much for microbial fuel cells?

Forward osmosis membrane favors an improved proton flux and electricity generation in microbial fuel cells

Enhancement of electrochemical performance in PVDF-co-HFP cation exchange membrane with modifications by doping PP13-TFSI ionic liquid and sulfonation

Improved Performance of Air-Cathode Single-Chamber Microbial Fuel Cell for Wastewater Treatment Using Microfiltration Membranes and Multiple Sludge Inoculation

Integration of Microbial Fuel Cell with Independent Membrane Cathode Bioreactor for Power Generation, Membrane Fouling Mitigation and Wastewater Treatment

Power Generation Enhanced by a Polyaniline–phytic Acid Modified Filter Electrode Integrating Microbial Fuel Cell with Membrane Bioreactor