Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

A Polarisation-Independent Blue-Phase Liquid Crystal Lens Array Using Gradient Electrodes

Polarization‐independent Blue‐phase Liquid‐crystal Gratings Driven by Vertical Electric Field

A Blue Phase Liquid Crystal Fresnel Lens with Large Transverse Electric Field Component

40.3: Polarization‐dependent Binocular Waveguide Display with Patterned Cholesteric Liquid Crystal Optics

Liquid crystal microlens arrays with switchable positive and negative focal lengths

Electrically tunable polarisation-independent blue-phase liquid crystal binary phase grating via phase-separated composite films

Single Cell Gap Polymer-Stabilized Blue-Phase Transflective Lcds Using Internal Nanowire Grid Polarizer

A Fast-Response and Helicity-Dependent Lens Enabled by Micro-Patterned Dual-Frequency Liquid Crystals

Electrically controllable liquid crystal paraxial Fresnel zone plate based on concentric zones patterned electrode

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

Ferroelectric thin films with liquid crystal for gradient index applications

A liquid crystal geometric phase hyperbolic lens with a positive focal length for arbitrary circularly polarized incidence

Optically anisotropic, electrically tunable microlens arrays formed via single-step photopolymerization-induced phase separation in polymer/liquid-crystal composite materials

Low Voltage And Hysteresis-Free Blue Phase Liquid Crystal Dispersed By Ferroelectric Nanoparticles

Blue-phase liquid crystal display with high dielectric material

Polarized Light-Guide Plate for Liquid Crystal Display.

Liquid Crystal Depolarizer Based on Photoalignment Technology

Non-polar Flexoelectrooptic Effect in Blue Phase Liquid Crystals

Self-polarizing Terahertz Liquid Crystal Phase Shifter

Polarization Independent Liquid Crystal Gratings Based On Orthogonal Photoalignments