Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Electrically controllable liquid crystal paraxial Fresnel zone plate based on concentric zones patterned electrode

Novel Transflective Lcd Based on Patterned Polarizer Using Photoaligrunent Technique

Rapid fabrication of an electrically switchable liquid crystal Fresnel zone lens.

Electrically Modulated Optical Properties of Fluorescent Chiral Nematic Liquid Crystals

Electrically switchable liquid crystal Fresnel lens using UV-modified alignment film

Micro-patterned Photo-Aligned Ferroelectric Liquid Crystal Fresnel Zone Lens.

Switchable Fresnel Lens Based on Hybrid Photo-Aligned Dual Frequency Nematic Liquid Crystal

An Optical Circular-Polarization Modulator Based Liquid Crystal

Refractive Fresnel liquid crystal lenses driven by two voltages

Electrically Switchable Structural Patterns and Diffractions in a Dual Frequency Nematic Liquid Crystal

Direct-writing Electric-Controlled Micro Fresnel Zone Plate with Ferroelectric Domain In-Version

Programmable fractal zone plates (FraZPs) with foci finely tuned

A Blue Phase Liquid Crystal Fresnel Lens with Large Transverse Electric Field Component

Adaptive focal lengths in white light focusing Fresnel lenses enabled by reflective-type and phase-only spatial light modulator

A Fast-Response and Helicity-Dependent Lens Enabled by Micro-Patterned Dual-Frequency Liquid Crystals

A Planar Fresnel Lens in Reflection Type Based on Azo-Dye-Doped Cholesteric Liquid Crystals Fabricated by Photo-Alignment

Diffraction and Polarization Properties of Electrically–Tunable Nematic Liquid Crystal Grating

Wide Tunable Laser Based on Electrically Regulated Bandwidth Broadening in Polymer-Stabilized Cholesteric Liquid Crystal

Programmable spatial light modulator and its application in fabricating optical components of polymer dispersed liquid crystal

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

Focusing Properties of Fractal Zone Plates with Variable Lacunarity: Experimental Studies Based on Liquid Crystal on Silicon