Abstract:Kinematic model predictive control (MPC) is well known for its simplicity and computational efficiency for path tracking of autonomous vehicles, however, it merely works well at low speed. In addition, earlier studies have demonstrated that tracking accuracy is improved by the feedback of yaw rate, as it improves the system transients. With this in mind, it is expected that the performance of path tracking can be improved by a cascaded controller that utilizes kinematic MPC to determine desired yaw rate rather than steering angle, and uses proportional-integral-derivative (PID) control to follow the reference yaw rate. However, directly combining MPC with PID feedback control of yaw rate results in a controller with poor tracking accuracy. The simulation results show that the cascaded MPC-PID controller has relatively stable but larger error compared to classic kinematic and dynamic MPC. Based on the analysis of vehicle sideslip angle, a novel path tracking control method is proposed, which is designed using a kinematic MPC to handle the disturbances on road curvature, a PID feedback control of yaw rate to reject uncertainties and modeling errors, and a vehicle sideslip angle compensator to correct the kinematic model prediction. The proposed controller performances involving steady-state and transient response, robustness, and computing efficiency were evaluated on Carsim/Matlab joint simulation environment. Furthermore, field experiments were conducted to validate the robustness against sensor disturbances and time lag. The results demonstrate that the developed vehicle sideslip compensator is sufficient to capture steer dynamics, and the developed controller significantly improves the performance of path tracking and follows the desired path very well, ranging from low speed to high speed even at the limits of handling.

Mpc-Based Path Tracking Controller Design For Autonomous Ground Vehicles

Predictive Control Method of Autonomous Vehicle Based on Tracking-error Model

Nonlinear Model Predictive Path Tracking Control for Autonomous Vehicles Based on Orthogonal Collocation Method

Learning-Based MPC Controller for Drift Control of Autonomous Vehicles

NMPC-based Path Tracking Control Strategy for 4WID Autonomous Vehicle Considering Handling Stability Under Extreme Conditions

Design And Evaluation Of Path Following Controller Based On Mpc For Autonomous Vehicle

Path Tracking Control for Autonomous Vehicles Based on an Improved MPC

Data-Driven Enhancements for MPC-Based Path Tracking Controller in Autonomous Vehicles

An Improved Kinematic Model Predictive Control for High-Speed Path Tracking of Autonomous Vehicles

A novel path tracking system for autonomous vehicle based on model predictive control

MPC-based Path Tracking Control with Forward Compensation for Autonomous Driving

Model-Predictive-Control-Based Path Tracking Controller of Autonomous Vehicle Considering Parametric Uncertainties and Velocity-Varying

Collision Avoidance Path Planning and Tracking Control for Autonomous Vehicles Based on Model Predictive Control

Variable step MPC trajectory tracking control method for intelligent vehicle

Research on Trajectory Tracking Control of Intelligent Vehicles Based on Model Predictive Control

Intelligent Vehicle Path Tracking Control Based on Improved MPC and Hybrid PID

Speed-Varying Path Tracking Based on Model Predictive Control for Autonomous Vehicles

Adaptive MPC path-tracking controller based on reinforcement learning and preview-based PID controller

Research on Intelligent Vehicle Trajectory Tracking Control Based on Improved Adaptive MPC

Practical Nonlinear Model Predictive Controller Design for Trajectory Tracking of Unmanned Vehicles

A Model Predictive Control with Preview-Follower Theory Algorithm for Trajectory Tracking Control in Autonomous Vehicles