Abstract:Polyhedral oligomeric silsesquioxane (POSS) is a nanostructured soft material that tremendously influences the properties of polymers. This paper delineates the preparation of polyurethane–POSS hybrid materials by physical blending and in-situ polymerization, and studies their properties. In the physical blending method, a polyurethane (BDO–PU) was prepared by using polycaprolactone diol (PCL-diol) as a soft segment, 4,4(^prime )-methylenebis(phenyl isocyanate) (MDI) as a diisocyanate and 1,4-butanediol (BDO) as a chain extender. The PU–POSS hybrid material (BDO–PU/POSS) was then prepared by the dispersion of POSS (octahydroxy POSS) molecules in the synthesized BDO–PU matrix by the solution mixing method. In the in-situ polymerization method, POSS–PU and POSS–BDO–PU hybrid materials were prepared using POSS and the combination of POSS and BDO as a crosslinker or a chain extender. The formation of PU and PU–POSS hybrid materials was confirmed by Fourier transform infrared and differential scanning calorimetry analyses. The introduction of octahydroxy POSS molecules into the PU matrix resulted in a reduction of glass transition temperature ((T_{mathrm {g}})). However, POSS–PU hybrid materials prepared by the in-situ polymerization method had significantly less (T_{mathrm {g}}) compared to the hybrid materials prepared by the solution or physical blending method. The incorporation of POSS molecules by using the in-situ polymerization process resulted in an increase in the surface hydrophobicity (water contact angle, WCA (=) 125(^{circ })) compared to the same prepared by using the solution blending process (WCA (=) 106(^{circ })). Moreover, the WCA values of all hybrid materials (WCA (=) 106–125(^{circ })) are much higher than those of the pristine BDO–PU (WCA (=) 84(^{circ })). The higher WCA value of the hybrid materials is due to the combined effect of the hydrophobic nature of POSS molecules as well as the increased surface roughness, as evidenced by the AFM 3D images. The hybrid materials prepared by the in-situ polymerization method exhibited improved mechanical and thermal properties compared to those prepared by the solution blending method.

A Novel Antistatic Polyurethane Hybrid Based on Nanoscale Ionic Material

A Novel Ternary Composite of Polyurethane/Polyaniline/Nanosilica with Antistatic Property and Excellent Mechanical Strength: Preparation and Mechanism

Synthesis and Properties of Nanosilica‐reinforced Polyurethane for Grouting

Novel polyurethane networks based on hybrid inorganic/organic phosphazene-containing nanotubes with surface active hydroxyl groups

Enhanced Mechanical and Dielectric Properties of Polyurethane Elastomers Containing Modified SiO 2

Synergistic enhancement effect of nano-SiO2 and ionic liquids on mechanical properties and impact resistance of polyurethane elastomer

Synergistic enhancement of the robustness of multifunctional polyurethane via an ionic noncovalent cross-linking network and aromatic disulfides

TiO2 nano-filler and ionic liquid-blended polyurethane elastomer films for enhanced antistatic applications

Polyurethane–POSS hybrid materials: by solution blending and in-situ polymerization processes

Improving Thermal Stability of Polyurethane through the Addition of Hyperbranched Polysiloxane

Polyurethane/Nanosilver-Doped Halloysite Nanocomposites: Thermal, Mechanical Properties, and Antibacterial Properties

Synthesis of N-phenylaminomethyl POSS and its utilization in polyurethane

N-Phenylaminomethyl hybrid silica, a better alternative to achieve reinforced PU nanocomposites

The effect of silicon incorporation on hybrid polyurethane‐imide elastomers with graphite flakes: Unique microstructures, conducting properties, and mechanical properties

Anomalous Strengthening Behavior of Nanocrystal-Reinforced Polyurethane Fibers

Effects of Modified Al2O3-Decorated Ionic Liquid on the Mechanical Properties and Impact Resistance of a Polyurethane Elastomer

Few-Layered Boron Nitride Nanosheets for Strengthening Polyurethane Hydrogels

POSS/Polyurethane Hybrids and Nanocomposites: A Review on Preparation, Structure and Performance

Fabrication of multifunction polyurethane with robust, self-healing and anti-corrosion performance based multiple dynamic bonds strategy

Synthesis and application of silicone-modified polyurethane as a slip-elastic finishing agent for polyamide fabrics

Synergistic of anionic and nonionic monomers for high solid content bio-based waterborne polyurethane sizing agents