Abstract:As a viable wastewater treatment and energy recovery technology, microbial fuel cell (MFC) requires more research with regard to the simultaneous achievement of high-quality effluent and high power generation. In this study, a novel flow-through carbon-based composite anode configuration is proposed, which combines the carbon cloth of two-dimensional anode with wooden granular activated carbon of three-dimensional anode. The proposed configuration enhances the performance of power production and chemical oxygen demand degradation by promoting the mass transfer, reducing internal resistance and increasing bioburden. Microbial fuel cell with the composite anode exhibited the highest maximum power density (1300 +/- 50 mW m(-2)) and the highest chemical oxygen demand removal rate constant (0.155 +/- 0.007 h(-1)) compared with the microbial fuel cell using the carbon cloth anode (1136 +/- 46 mW m(-2) and 0.072 +/- 0.008 h(-1)) or the wooden granular activated carbon anode (1045 +/- 32 mW m(-2) and 0.129 +/- 0.009 h(-1)). Meanwhile, at a lower chemical oxygen demand concentration (about 48 mg L-1), the microbial fuel cell with the composite anode maintained a current density of 2.4 A m(-2), which is 18% higher than the wooden granular activated carbon anode (2.04 A m(-2)) and 400% higher than the carbon cloth anode (0.48 A m(-2)). The cyclic voltammetry and electrochemical impedance spectroscopy tests confirmed that the composite anodes displayed better electrochemical performance. Improving the flow rate and reducing the external resistance could effectively enhance the power production and chemical oxygen demand removal performance of microbial fuel cells, while the computational fluid dynamics simulation intuitively demonstrated the positive effect of the composite anode on chemical oxygen demand degradation. These results suggest that the flow-through composite anode provides a feasible strategy to simultaneously enhance the power generation and improve the effluent quality. (C) 2019 Elsevier Ltd. All rights reserved.

Advanced Gas-Emission Anode Design for Microfluidic Fuel Cell Eliminating Bubble Accumulation

Designing and multi-evaluation of a promising gas-emission anode for eliminating CO 2 accumulation in microfluidic fuel cell

Microfluidic fuel cells integrating slanted groove micro-mixers to terminate growth of depletion boundary layer thickness

Y-Shaped Microfluidic Fuel Cell with Novel Cathode Structure

In-situ Bubble Emission and Transport Mechanisms in Janus Electrode within Direct Liquid Fuel Cells

Microfluidic Fuel Cell with Arc-Shaped Electrodes to Adapt to Its Mixing Zone, a Simulation Study

Design and Fabrication of Fuel-Self-Propelled Reaction Device for Passive Micro Direct Methanol Fuel Cell Anodes

Enabling high-concentrated fuel operation of fuel cells with microfluidic principles: A feasibility study

Current density distribution in air-breathing microfluidic fuel cells with an array of graphite rod anodes

Counter-flow formic acid microfluidic fuel cell with high fuel utilization exceeding 90%

Dual-electrolyte aluminum/air microfluidic fuel cell with electrolyte-recirculation

Superaerophobic Electrodes for Direct Hydrazine Fuel Cells.

A Counter-flow Microfluidic Fuel Cell Achieving Concentrated Fuel Operation

Reaction-separation anode for enhancement of fuel diffusion against CO2 evolution to improve performance of direct liquid-feed fuel cells

A Novel CO2 Gas Removal Design for a Micro Passive Direct Methanol Fuel Cell

Unsymmetrical design and operation in counter-flow microfluidic fuel cell: A prospective study

A Tapered Serpentine Flow Field for the Anode of Micro Direct Methanol Fuel Cells

A High-Performance Al-air Fuel Cell Using a Mesh-Encapsulated Anode Via Al–Zn Energy Transfer

Optimization and Simulation of a Carbon-Based Flow-Through Composite Anode Configuration to Enhance Power Generation and Improve Effluent Quality Simultaneously for Microbial Fuel Cells

Anode Structure Design for the High-performance Anion-exchange Membrane Direct Glucose Fuel Cell

Characterization of Microfluidic Fuel Cell Based on Multiple Laminar Flow