Abstract:The Self-sensing Active Magnetic Bearings (SSAMBs) which feature for the simplification of independent displacement sensors, contribute to both cost reduction and convenience in control and assembly. The key point of this technique is to accurately estimate rotor position signals directly from coil voltages or currents, thus the actuator itself also serves as a virtual displacement sensor. Although several feasible approaches have been proposed to realize the self-sensing process, there still lie limitations in estimation accuracy, robustness and dynamic performance of the system. In fact, due to the nonlinear property of the self-sensing process, few accurate models are available for quantitative analysis of the estimation accuracy, and this restricts further development of this technique. Focusing on the modulation type SSAMBs, an accurate analytical model of the self-sensing in frequency domain is firstly established in this paper. Eddy current effects and filter properties are also considered for better accuracy. Based on this model, we evaluate possible estimation error sources during the self-sensing process, and investigate if the estimation accuracy can be improved fundamentally by selecting main system parameters properly. In this way, the estimation accuracy gets further improved under existing compensation methods, and better system robustness and dynamic performance can be achieved. Finally, the analytical model and associated conclusions are validated through static experiment, 4-Degree of Freedom (DOF) self-sensing rotor levitation experiment and 0-5000 rpm rotating operation experiment on a 4-DOF rigid rotor-radial SSAMBs platform. (C) 2016 Elsevier B.V. All rights reserved.

Inertia Identification Based on Model Reference Adaptive System with Variable Gain for AC Servo Systems

A VFF-RLS Method of Inertia Identification for PMSM.

Sensorless interior permanent magnet synchronous motor control with rotational inertia adjustment

On-Line Identification of Moment of Inertia for Permanent Magnet Synchronous Motor Based on Model Reference Adaptive System

A Model Reference Adaptive Sliding Mode Control for the Position Control of Permanent Magnet Synchronous Motor.

Sensorless Interior-Pmsm Control with Rotational Inertia Adjustment

A Fast Integral Sliding Mode Controller with an Extended State Observer for Position Control of Permanent Magnet Synchronous Motor Servo Systems

Inertia and Auto-Tuning of Speed Controllers for AC Servo Systems

Accurate Simulation and Analysis of PMSM Vector Control System

Inertia identification and auto-tuning of induction motor using MRAS

Improved MRAS Parameter Identification Method for PMSM Based on Permanent Magnet Flux Linkage Free Model

Identification of Self-Tuning Induction Motor Drive System Based on Improved Least-Square Algorithm

Parameter Identification of a Permanent Magnet Synchronous Motor Based on the Model Reference Adaptive System with Improved Active Disturbance Rejection Control Adaptive Law

A novel sliding mode control with MRAS inertia identification for permanent magnet synchronous motors

Modeling and Simulation of PMSM High- Performance Position Servo System

Adaptive Flux Estimation and Parameters Identification of Induction Motors Based on Model Reference Approach

Adaptive Rotor Flux Estimation and Parameter Identification for Induction Motor

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Precision Motion Control Of Permanent Magnet Linear Synchronous Motor Servo System Based On An Integrated Controller With Inertia Variation Compensation

A Composite Adaptive Robust Control for Pneumatic Servo Systems with Time-Varying Inertia

Adaptive position servo control of permanent magnet synchronous motor