Abstract:ZnMoO2S2·H2O and ZnMoS4 were synthesized in laboratory. Their thermal stability was investigated by means of thermogravimetric analysis (TGA), and their lubricating characteristics at temperatures up to 500°C were examined by sliding a Sialon ceramic ball against a W18Cr4V steel disc on a high temperature ball-on-disc tribometer. The morphologies and the elemental distributions in the worn surfaces of the ceramic ball were observed and determined by scanning electron microscopy (SEM) equipped with energy dispersion spectrometry (EDS). The chemical states of some typical elements in the worn surfaces of the ceramic ball were explored with X-ray photoelectron spectroscopy (XPS). As the results, both ZnMoO2S2·H2O and ZnMoS4 showed good lubricity for Sialon ceramic/W18Cr4V steel pair from room temperature to 400°C. The XPS analytical results indicate that both ZnMoO2S2·H2O and ZnMoS4 experienced tribochemical reactions during the friction process at 300°C, thereby generating S and Mo of higher valence. SEM observations of the worn surfaces of the Sialon ceramic ball show that a surface protective film composed of the lubricants and their decomposed products was formed thereon, which contributes to keep the sliding surfaces off contact and abate the adhesion and scuffing on the lubricated surfaces, therefore to decrease the friction coefficients.

Dry Sliding Wear of TiAl-Graphene-Silver Composite at Elevated Temperatures

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

The Thermal Stability and Lubricity of Zinc Thiomolybdenate at Temperatures Up to 500°C

Tribological Behavior Of Graphene Reinforced 600 Degrees C High Temperature Titanium Alloy Matrix Composite

Investigation on Microstructure and Wear Behavior of the NiAl–TiC–Al2O3 Composite Fabricated by Self-Propagation High-Temperature Synthesis with Extrusion

Effect of Temperature on Tribological Properties of Tial Based Self-Lubricating Composites

Microstructures and Properties of Nanostructured TiN/MoS2/Ag Composite Film Prepared by Pulsed Laser Deposition

Tribological performance of silicone oil based Al2O3 nano lubricant for an Mg alloy subjected to sliding at elevated temperatures

The Dry Sliding Wear Properties of Nano-Sized TiCp/Al-Cu Composites at Elevated Temperatures

Tribological Properties of γ-TiAl Alloy Fretting against Nickel-Based Superalloy at Elevated Temperature

Wear Properties of NiAl Based Materials

Preparation and tribological properties of multi-layer graphene/silicon dioxide composites-based solid lubricant coatings at elevated temperatures

High-Temperature Friction and Wear Behavior of Nickel-Alloy Matrix Composites with the Addition of Molybdate

Tribological study of W-S-(C) sputtered coatings sliding against aluminium at elevated temperatures

Tribological Performance of Gradient Ag-Multilayer Graphene/TC4 Alloy Self-Lubricating Composites Prepared By Laser Additive Manufacturing

Tribological performance of a cost-effective CrFeNiAl0.3Ti0.3 high entropy alloy based self-lubricating composite in a wide temperature range

Evolution of the Microstructure and Lubrication Mechanism of AgTaO3 Films at High Temperatures: A MD Simulation Study

Tribological behaviors of nano-schistose MSH in phosphate/graphite composite lubricating coatings under different friction temperatures

Wear Behavior of TiN/TiAlSiN Nanocomposite Multilayer Coatings from Ambient Temperature to Medium Temperature

Microstructure and tribological behaviors of laser cladded CuAlMnTi–xTiC composite coatings at elevated temperature

Tribological behavior of NiCrW-based self-lubricating composites against IC10 alloy under high temperature and extremely slow sliding speed