Abstract:Pipelines are embedded in industrial sites and residential environments, and maintaining these pipes is crucial to prevent leakage. Given that most pipelines are buried, the development of robots capable of exploring their interiors is essential. In this work, we introduce a novel in-pipe robot utilizing Continuously Variable Transmission (CVT) mechanisms for navigating various pipes, including vertical and curved pipes. The robot comprises one air motor, three CVT mechanisms, and six wheels at the end of six slider-crank mechanisms, including three active and three idler ones. The slider crank and spring mechanism generate a wall press force through the wheel to prevent slipping inside the pipe. This capability allows the robot to climb vertical pipes and adapt to various pipe diameters. Moreover, by combining CVT mechanisms, whose speed ratios between the driver and driven pulleys are passively adjusted by the position of the slider, the robot achieves independent and continuous speed control for each wheel. This enables it to navigate pipes with various geometries, such as straight-curved-straight pipes, using only one motor. Since active control of each wheel is not needed, the complexities of the robot controller can be significantly reduced. To validate the proposed mechanism, MATLAB simulations were conducted, and in-pipe driving experiments were executed. Both simulation and experimental results have shown that the robot can effectively navigate curved pipes with a maximum speed of 17.5 mm/s and a maximum traction force of 56.84 N.

Development of an In-Pipe Robot with Differential Screw Angles for Curved Pipes and Vertical Straight Pipes

Axiomatic Design Method to Design a Screw Drive In-Pipe Robot Passing Through Varied Curved Pipes

Design and Motion Mechanism of a Screw Drive In-pipe Robot with Adaptability to In-pipe Environment

Design and Analysis of a Novel Active Screw-Drive Pipe Robot

Design and locomotion control strategy for a steerable in-pipe robot

Active Screw-Driven In-Pipe Robot for Inspection

Design and Development of a Deformable In-Pipe Inspection Robot for Various Diameter Pipes

In-Pipe Detection of Three-Dimensional Curving Mini-Pipe

Development of a Wheel-Type In-Pipe Robot Using Continuously Variable Transmission Mechanisms for Pipeline Inspection

Design and Motion Analysis of an In-pipe Robot with Adaptability to Pipe Diameters

Design and motion mechanism analysis of screw-driven in-pipe inspection robot based on novel adapting mechanism

Research on a Tri-axial Differential-Drive In-Pipe Robot

Design and Research on the Mechanical Adaptive In-Pipe Robot Drive Unit

An In-Pipe Inspection Robot Based on Adaptive Mobile Mechanism: Mechanical Design and Basic Experiments

Design and analysis of a pipe robot based on metamorphic mechanism

Development of an Adaptive Mobile Robot for In-Pipe Inspection Task

Analysis of the Motion Mechanism of Actively Spirally Driven Pipe Robot

Design of a Mobile Mechanism Possessing Driving Ability and Detecting Function for In-Pipe Inspection

Fuzzy Theory Based Control Method for an In-Pipe Robot to Move in Variable Resistance Environment

Design and Experimental Validation of a Worm-Like Tensegrity Robot for In-Pipe Locomotion

Screw Drive In-pipe Robot with Axial and Circum-directional Inspection Ability