Abstract:Electrochemical seismic sensors are key components in monitoring ground vibration, which are featured with high performances in the low-frequency domain. However, conventional electrochemical seismic sensors suffer from low repeatability due to limitations in fabrication and limited bandwidth. This paper presents a micro-fabricated electrochemical seismic sensor with a force-balanced negative feedback system, mainly composed of a sensing unit including porous sensing micro electrodes immersed in an electrolyte solution and a feedback unit including a feedback circuit and a feedback magnet. In this study, devices were designed, fabricated, and characterized, producing comparable performances among individual devices. In addition, bandwidths and total harmonic distortions of the proposed devices with and without a negative feedback system were quantified and compared as 0.005-20 (feedback) Hz vs. 0.3-7 Hz (without feedback), 4.34 ± 0.38% (without feedback) vs. 1.81 ± 0.31% (feedback)@1 Hz@1 mm/s and 3.21 ± 0.25% (without feedback) vs. 1.13 ± 0.19% (feedback)@5 Hz@1 mm/s (ndevice = 6, n represents the number of the tested devices), respectively. In addition, the performances of the proposed MEMS electrochemical seismometers with feedback were compared to a commercial electrochemical seismic sensor (CME 6011), producing higher bandwidth (0.005-20 Hz vs. 0.016-30 Hz) and lower self-noise levels (-165.1 ± 6.1 dB vs. -137.7 dB at 0.1 Hz, -151.9 ± 7.5 dB vs. -117.8 dB at 0.02 Hz (ndevice = 6)) in the low-frequency domain. Thus, the proposed device may function as an enabling electrochemical seismometer in the fields requesting seismic monitoring at the ultra-low frequency domain.

A Mems Based Integrated Three Axial Electrochemical Seismic Sensor

MEMS-Based Integrated Triaxial Electrochemical Seismometer

MEMS-Based Electrochemical Seismometer Relying on a CAC Integrated Three-Electrode Structure

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

A MEMS Electrochemical Seismometer Based on the Integrated Structure of Centrosymmetric Four Electrodes

The MEMS-Based Electrochemical Seismic Sensor With Integrated Sensitive Electrodes by Adopting Anodic Bonding Technology

A MEMS-Based Electrochemical Angular Accelerometer With Integrated Plane Electrodes for Seismic Motion Monitoring

MEMS-Based Electrochemical Seismometer with a Sensing Unit Integrating Four Electrodes

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Fabrication and Characterization of Monolithic Integrated Three-Axis Acceleration/Pressure/Magnetic Field Sensors

An Electrochemical, Low-Frequency Seismic Micro-Sensor Based on MEMS with a Force-Balanced Feedback System

Micro-Electrochemical Rotational Vibration Sensor with SOI-Based Microelectrodes Used for Seismic Monitoring

Cmos-Mems Tri-Axial Piezo-Resistive Tactile Sensor With Monolithically/ Vertically Integrated Inductive Proximity Sensor

A Single-Chip 3-D Electric Field Microsensor With Piezoelectric Excitation

An Optical Interferometry Based MEMS Accelerometer Applicable to Seismic-Grade Measurement

A MEMS Electrochemical Angular Accelerometer with Silicon-Based Four-Electrode Structure

A MEMS Electrochemical Angular Accelerometer Leveraging Silicon-Based Three-Electrode Structure

Improved Resolution and Cost Performance of Low-Cost MEMS Seismic Sensor through Parallel Acquisition

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

A novel cmos-mems tri-axial tactile force sensor using capacitive and piezoresistive sensing mechanisms

A Mems Acoustic Particle Velocity Sensor Based on Electrochemical Method