Abstract:Magnetic eddy current losses is significant in permanent magnet motors, especially in high-power density permanent magnet motors. It significantly affects the magnet’s temperature and properties and may cause irreversible demagnetization. Several methods for reducing magnetic eddy current losses is proposed to address these problems. First, a field-circuit coupled mathematical model was established to calculate the magnetic eddy current losses. Experiments on the phase current and magnetic eddy current losses verify the accuracy of field-circuit coupled mathematical model. Then based on the model, the effect of the trigger angle, slot opening width, pole arc coefficient, pole arc center offset, and auxiliary slots on the magnetic eddy current losses were assessed. The results showed that the magnetic eddy current loss could be reduced by choosing a suitable leading trigger angle, pole arc coefficient, and pole arc center offset. A smaller slot opening width reduced the eddy current losses. A novel auxiliary slot with an optimized size is proposed to reduce eddy current losses. Finally, taking the trigger angle, slot opening width, pole arc coefficient, pole arc center offset and the auxiliary groove as the optimization factors and the magnetic eddy current loss as the optimization target, the optimal parameter scheme is obtained by Taguchi method. The simulation results show that the optimized magnetic eddy current losses is reduced by 8.57%.

Analysis of Eddy Current Losses in Surface-Mounted Permanent Magnet Vernier Machines

Analytical investigation of open-circuit eddy current loss in windings of PM machines

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Analytical Model of Eddy Current Loss in Windings of Permanent-Magnet Machines Accounting for Load

Analytical Modeling Of Eddy Current Loss In Retaining Sleeve Of Surface-Mounted Pm Machines Accounting For Influence Of Slot Opening

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Comparative Analysis of Loss Distribution in Permanent Magnet Synchronous Machine and Vernier Machine

Analysis of PM Eddy Current Loss in Rotor-PM and Stator-PM Flux-switching Machines by Air-gap Field Modulation Theory

Analysis Of Eddy Current Loss On Permanent Magnets In Pmsm With Fractional Slot

Reduction of Eddy-Current Losses by Circumferential and Radial PM Segmentation in Axial Flux Permanent Magnet Machines with Fractional-Slot Concentrated Winding

Loss Analysis of a New Low-Speed Direct-Drive Permanent-Magnet Vernier Machine

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Eddy-Current Calculation of Solid Components in Fractional Slot Axial Flux Permanent Magnet Synchronous Machines

Simple and Accurate Computation of Rotor Eddy-Current Losses in Surface-Mounted Permanent Magnet Machines Accounting for Magnet Circumferential Segmentation

3-D analysis of eddy current losses in permanent PMSM magnets

An Accurate and Fast PM Eddy Current Loss Calculation Method for Flux Switching Permanent Magnet Machine

Analytical Calculation of Magnetic Field Distribution and Stator Iron Losses for Surface-Mounted Permanent Magnet Synchronous Machines

Torque and Loss Analysis of Permanent Magnet Vernier In-Wheel Motors with Rotor Flux Barriers

Analytical Calculation of Rotor Eddy Current Losses of Surface-Mounted PMSM