Abstract:Three-dimensional structure gold nanoparticle clusters (3D Au) were electrodeposited onto multiwalled carbon nanotubes (MWCNTs) through improved three-step method, which involves: (1) potential cycling (CV, 200 mV.s(-1)) from +1.8 to 0.4 V was performed in 0.5 mol/L K2SO4 solutions for 10 min in order to produce oxide functional groups (carbonyl, hydroxyl, and carboxyl) at the defect sites located at the ends and/or the sidewalls of MWCNTs, (2) electrochemical oxidation of the Au(III) complex to the Au(V) complex from 2 mol/L K2PtCl4+0.1 mol/L K2SO4 aqueous solutions by using potential-step method (PS). The potential was jumped from 0.3 V to 1.1 V with different pulse width and this was repeated until a steady pulse current was reached. and (3) electrochemical transformation of the Au(V) complex to Au nanoparticle clusters on the surface of MWCNTs through cycling from +1.0 to -0.26 V in 0.1 mol/L H2SO4 solutions to the steady state. For comparison, however, experiments were also carried out with CV in the second step (2 mol/L K2PtCl4+0.1 mol/L K2SO4 aqueous solution with 190 cycles: these proved to be the optimal conditions). The morphology of 3D Au/MWCNTs electrode was characterized by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). The voltammetric behavior of hemoglobin (Hb) on 3D Au/MWCNTs-Nafion has been investigated in 10 nmol/L Hb solution (pH=6 PBS) by cyclic voltammetry (CV) and current-time method (CT). Compared with Au+MWCNTs-Nafion (+means mix together), Au/MWCNTs-Nation (uniform Au nanoparticle dispersion of MWCNTs, which was obtained when the second step adopts cyclic voltammetry instead of potential-step method), 3D Au/MWCNTs-Nafion gave a higher peak current and better reversibility. The higher sensitivity and lower detection limit show that 3D Au/IVIWCNTs-Nafion can offer a conductive microenvironment for the immobilized Hb to achieve direct electrochemistry. The average. coverage (T) of Hb immobilized on 3D Au/MWCNTs-Nafion was calculated to be 7.65 X le mol.cm(-2), testifies a high surface-to-volume ratio. Electron transfer rate constant (k(s)) was calculated to be 1.8 s(-1), which was proved 3D Au/MWCNTs-Nafion is more conducive to direct electron transfer between Hb and the electrode. Hb/Au/MWCNTs-Nafion potential application towards the electrocatalytic reduction of H2O2 was also conducted to show immobilized Hb exhibits excellent biocompatibility and stability. Our work points to a new path for the preparation of 3D Au/MWCNTs nanocomposites, which are promising as electrocatalysts in direct electrochemistry of Hb.

Hemoglobin immobilized in g-C3N4 nanoparticle decorated 3D graphene-LDH network: Direct electrochemistry and electrocatalysis to trichloroacetic acid

Direct Electrochemistry and Electrocatalysis of Hemoglobin on Three-Dimensional Graphene Modified Carbon Ionic Liquid Electrode

Hemoglobin Immobilized in Exfoliated Co2Al LDH-graphene Nanocomposite Film: Direct Electrochemistry and Electrocatalysis Toward Trichloroacetic Acid

Electrochemical doping of three-dimensional graphene networks used as efficient electrocatalysts for oxygen reduction reaction.

Direct Electrochemistry with Enhanced Electrocatalytic Activity of Hemoglobin in Hybrid Modified Electrodes Composed of Graphene and Multi-Walled Carbon Nanotubes

Electrodeposited Graphene and Silver Nanoparticles Modified Electrode for Direct Electrochemistry and Electrocatalysis of Hemoglobin

Synthesis of 1,3-Di(4-amino-1-pyridinium)propane Ionic Liquid Functionalized Graphene Nanosheets and Its Application in Direct Electrochemistry of Hemoglobin

Structure and Catalytic Activity of Hemoglobin Assembled with Layered Double Hydroxide Nanosheets by Coprecipitation Using a T-shaped Microreactor

Direct Electrochemistry and Electrocatalysis of Hemoglobin with Carbon Nanotube-Ionic Liquid-Chitosan Composite Materials Modified Carbon Ionic Liquid Electrode

Direct Electrochemistry and Electrocatalysis of Hemoglobin Based on Poly(diallyldimethylammonium Chloride) Functionalized Graphene Sheets/room Temperature Ionic Liquid Composite Film

Direct Electrochemistry and Electrocatalysis of the Hemoglobin Immobilized on Diazonium‐Functionalized Aligned Carbon Nanotubes Electrode

Electrochemical biosensor based on graphene, Mg2Al layered double hydroxide and hemoglobin composite

Direct Electrochemistry of Hemoglobin in Chitosan/Multiwalled Carbon Nanotubes/Ionic Liquid–Modified Carbon-Paste Electrode

Adsorption and Electrochemistry of Hemoglobin on Chi-Carbon Nanotubes Composite Film

Direct Electrochemistry of Hemoglobin on Single-Walled Carbon Nanotubes Modified Carbon Ionic Liquid Electrode and Its Electrocatalysis

Electrodeposition of Gold Nanoparticle Clusters on Multi-Wall Carbon Nanotubes and the Direct Electrochemistry of Hemoglobin

Direct electrochemistry and electrocatalysis of hemoglobin entrapped in composite matrix based on chitosan and CaCO3 nanoparticles

Electrochemistry and electrocatalysis of hemoglobin on multi-walled carbon nanotubes modified carbon ionic liquid electrode with hydrophilic EMIMBF4 as modifier

Direct electrochemistry of hemoglobin immobilized in the sodium alginate and SiO 2 nanoparticles bionanocomposite film on a carbon ionic liquid electrode

Direct electrochemistry and electrocatalysis of hemoglobin on gold nanoparticle decorated carbon ionic liquid electrode.

Investigation on Direct Electrochemical and Electrocatalytic Behavior of Hemoglobin on Palladium-Graphene Modified Electrode.