Abstract:Low-carbon martensitic stainless steels, such as 13%Cr4%Ni, are widely used in manufacturing hydraulic turbine runners. High tensile strength steel, such as cast CA6NM or wrought S41500 martensitic stainless steel, has an acceptable resistance to corrosion and cavitation, and reduces the weight and cost while offering a more efficient design. During operation, the combined effect of cyclic loading (fatigue) and corrosion reduces the fatigue strength and can initiate cracks at localized corrosion surface defects. In this study, we determined the bulk and localized corrosion behavior of wrought (S41500) and cast (CA6NM) 13%Cr4%Ni stainless steel before and after plastic deformation. Susceptibility to pitting corrosion was studied using open circuit potential and potentiodynamic polarization measurements in 0.020 M NaCl. Localized corrosion behavior was studied using a scanning droplet cell (SDC) and oil immersed scanning electrochemical cell microscopy (OI-SECCM). The bulk and localized electrochemical measurements after different surface preparation methods (mechanical polishing, followed by etching or electro-etching in different media) were compared. The surface defects including micro-voids and inclusions of different types were characterized. The location of pit initiation was then determined using scanning electron microscopy and profilometry imaging. A three-electrode microcell with a working electrode of 1 mm2 was designed and hyphenated with optical microscope to allow in situ tracking of pit initiation and growth. Chronopotentiometry and chronoamperometry controlled pit initiation, while optical microscopy demonstrated dynamic release of corrosion products and measured oxide repassivation kinetics. Finally, the in situ technique was developed further to include a microtensiometer fatigue apparatus to study the synergy effect between corrosion and fatigue. Location of pit initiation was compared with and without plastic deformation. Videos of pit initiation and growth will be presented.

Pit to Crack Transition Behavior in Proportional and Non-Proportional Multiaxial Corrosion Fatigue of 304 Stainless Steel

Corrosion Fatigue Behaviour of 304 Stainless Steel under Proportional and Non‐proportional Multiaxial Loading Condition

Variation In Mechanical Properties, Microstructures And Fracture Behavior Of 304 Stainless Steel During Low-Cycle Fatigue

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Electrochemical Properties of 304 Stainless Steel under Proportional and Non-Proportional Multiaxial Loading Condition

The low-cycle fatigue, deformation and final fracture behaviour of an austenitic stainless steel

On multiaxial creep–fatigue considering the non-proportional loading effect: Constitutive modeling, deformation mechanism, and life prediction

Visualization and Location Determination of Pit Initiation Sites in Martensitic Stainless Steel during Corrosion-Fatigue Cyclic Plastic Deformation

3D Analysis for Pit Evolution and Pit-To-Crack Transition During Corrosion Fatigue

Numerical analysis of pit-to-crack transition under corrosion fatigue using a stochastic pit generation algorithm

Fatigue Behaviors and Life Evaluation of AISI304 Stainless Steel under Non-Proportional Multiaxial Random Loading

Ultra-high Cycle Fatigue Fracture Mechanism of a Precipitation HardeningStainless Steel at Different Stress Ratios

Anisotropic 3D Growth of Corrosion Pits Initiated at MnS Inclusions for A537 Steel During Corrosion Fatigue

Multi‐scale Fatigue Crack Propagation in 304 Stainless Steel: Experiments and Modelling

Microstructural evolutions and life evaluation of non-proportional creep-fatigue considering loading path and holding position effects

Prior corrosion and fatigue of 2024-T3 aluminum alloy

Quantitative 3D Characterization for Kinetics of Corrosion Initiation and Propagation in Additively Manufactured Austenitic Stainless Steel

Modeling of Corrosion Pit Growth for Prognostics and Health Management.

Cyclic Deformation and Low-Cycle Fatigue for 316LN Stainless Steel under Non-proportional Loading

Creep-fatigue interactive behavior and damage mechanism of TP321 stainless steel under hybrid-controlled conditions

Probabilistic constitutive model for corroded structural steel with stochastic pits under monotonic tension