Abstract:Due to the windless-air-induced added mass and damping effects, the mechanical frequency and damping ratio of a bridge deck model in wind tunnel test are usually under-estimated and over-estimated, respectively. In this study, the vertical and torsional added mass and damping and their effects on the mechanical frequency and damping ratio of an ideal plate and five typical bridge decks are thoroughly investigated based on single degree-of-freedom free vibration numerical simulations. The aerodynamic forces are linearly expressed as functions of vibrating accelerations, velocities, added mass coefficients, and added damping coefficients. The discrepancies between two-dimensional (2D) and three-dimensional (3D) simulations are found to be small. The numerical simulation accuracy is validated through comparison with the results from the Theodorsen expression and forced vibration simulations. It is found that the added mass coefficients are insensitive to the vibration amplitudes, while the added damping coefficients almost linearly increase with the amplitudes. Based on the added mass and damping coefficients, the vertical and torsional air-induced frequency reduction coefficients and aerodynamic damping ratios are calculated. Both the frequency reduction coefficients and aerodynamic damping ratios are closely related to deck configurations and model mass/mass moment of inertia, while independent of vibration frequencies. For the concerned six section models, the vertical and torsional frequency reduction coefficients are mainly located in the ranges of (1.0%, 2.5%) and (0.4%, 1.2%), respectively. The aerodynamic damping ratios are significantly dependent on the vibration amplitudes and may exceed the mechanical damping ratios for large amplitude cases. Based on numerical simulations, the mechanical frequency and damping ratio of a spring-suspended deck model can be identified by excluding the added mass and damping effects.

Air-induced Nonlinear Damping and Added Mass of Vertically Vibrating Bridge Deck Section Models under Zero Wind Speed

Added mass and damping effects on vibrating bridge decks in still air

Nonlinear Vibration Characteristics of Bridge Deck Section Models in Still Air

Calculating Vortex-Induced Vibration of Bridge Decks at Different Mass-Damping Conditions

Free vibration response of bridge deck section at zero wind speed

A Simplified Model to Evaluate Peak Amplitude for Vertical Vortex-Induced Vibration of Bridge Decks

Quantitative Evaluation of Empirical Models of Vortex-Induced Vibration of Bridge Decks Through Sectional Model Wind Tunnel Testing

Identification of the Nonlinear Aerodynamic Load of Vortex-Induced Vibration for a Centrally Slotted Box Deck Model Based on a Wind Tunnel Test

Tuned Mass Damper Design for Vortex-Induced Vibration Control of a Bridge: Influence of Vortex-Induced Force Model

Wind-induced self-excited vibrations of a twin-deck bridge and the effects of gap-width

Unified Numerical Model of Wind-Induced Response of Long-Span Structures: Aerostatic Torsional Divergence, Flutter, and Random Buffeting

Self-Excited Forces Induced by Lateral Vibration of Bridge Decks

AIR-INPUT-ENERGY CHARACTERISTICS OF H-SHAPE BRIDGE DECKS INDUCED BY WIND VIBRATION

Extraction of aerodynamic damping and prediction of vortex-induced vibration of bridge deck using CFD simulation of forced vibration

Aerodynamic Damping Model for Vortex-induced Vibration of Suspended Circular Cylinder in Uniform Flow

Nonlinear dynamic subsystem model for large-amplitude motion-induced aerodynamic forces of bridge decks

Experimental Investigations on VIV of Bridge Deck Sections: A Case Study

Vortex-Induced Oscillations of Bridges: Theoretical Linkages Between Sectional Model Tests and Full Bridge Responses

Three-dimensional coupling vibration of wind-vehicle-bridge systems

Decoupling Free Vibration System of Bridge Section Model

Experimental and numerical studies of the vortex-induced vibration behavior of an asymmetrical composite beam bridge