Abstract:Voltage sags have become one of the most important power quality issues in recent years. According to survey results across the US, voltage sags and short duration power outages account for 92% of power quality problems encountered by industrial customers. Voltage sags often causes undervoltage faults in various sensitive loads and subsequently interrupt manufacturing processes. Such interruptions often inflict severe losses for industries. The existing sag compensation systems accomplish fast response within small fraction of a fundamental cycle by tracking the line voltages closely, and switch on the compensator whenever the voltage waveforms deviate from the normal values. However, utility voltages often contain surges and spikes with amplitudes up to 200% resulting from the switching of power factor correction capacitors and lightning strikes. Such transient disturbances may trigger the sag compensator into operation if the controller is very sensitive. The switching frequency of the compensation inverter is insufficient to compensate the narrow pulses of voltage spikes. Furthermore, the power semiconductors of the inverter may also be damaged by the surges. In this paper, a synchronous reference frame (SRF) based sag compensation scheme are presented. A sag detection mechanism is included in the controller for correct and prompt identification of voltage sags. Disturbances like voltage spikes are attenuated to avoid any false triggering of the compensator. The overall system responds to voltage sags and restore the voltage back to balanced 1.0 pu. for the critical loads within one-eighth to one-fourth of a cycle, which meet the requirement of ITI standard and SEMI-F47 standard. Simulation and laboratory test results will be presented to verify the functionality of the proposed controller.

Study on the Performance of Light Sources under Voltage Sag and the Compensation Method

Study on the Characteristics and Compensation of Lamp Voltage Drop

Research on Load Characteristics of Energy-saving Lamp and LED Lamp

Benchmarking of Voltage Sag Generators

Experimental Study on Voltage Sag Tolerance of LED Electronic Display

A 150 Kva/0.3 MJ Current Source Voltage Sag Compensation System

Investigation on Start-Up Characteristics of Automotive HID Lamps with Electronic Ballast

Discussion On Voltage Sag Source Locating Method In Distribution Network

Voltage Sag Generator for Wind Power Generation System

System Voltage Sag Performance Estimation

Dynamic Coordinated Control and Capacity Optimization Method for Voltage Sag Compensation with Energy Storage Connected in Series and in Parallel

Review on methods for voltage sag source location in power system

Research on the Effects of Voltage Sags and Harmonics on the Output Characteristics of Switching Power Supply

A Comprehensive Weight-Based Severity Evaluation Method of Voltage Sag in Distribution Networks

Design and Implementation of a Series Voltage Sag Compensator under Practical Utility Conditions

Electro-optical Conversion Stability Relative Test System Design for Electrodeless Discharge Lamps

A Study on Using VSC-HVDC for Fast Restoring Loads after System Contingencies

Assessment of voltage sag/swell in the distribution network based on energy index and influence degree function

Study on Detection Method of Distorted Voltage Sag in Distribution Network under the Background of Incorporating New Energy

An Optimal Reactive Power Compensation Allocation Method Considering the Economic Value Affected by Voltage Sag

A Novel Transformer-Less Series Voltage Sag Compensator Without Energy Storage Capacitors and Its New Time Optimal Control Strategy