Abstract:An implicit finite-difference analysis has been used to model the diffusion process in a two-phase ternary system. The system was of finite length, and the interface between the two phases, α and γ, was allowed to move as the α phase grew or dissolved. Equilibrium at the interface was assumed. For simplicity, the diffusion coefficients were assumed to be independent of composition, and the cross-coefficient diffusion terms were assumed to be negligible. The details of the computational process are described. The accuracy of the approach and the major sources of error are examined in detail. The numerical results are in excellent agreement with analytical predictions under the limited conditions for which analytical solutions are available. The computational model was applied to the detailed study of ferrite growth/dissolution in the iron-chromium-nickel ternary system to examine ferrite stability in austenitic stainless steel welds. The starting compositions of the ferrite and austenite were typical of these phases in the as-welded condition, and the isothermal equilibration was followed at 700 °C to 1300 °C. It was found that the transformation to the equilibrium state could be divided into two major stages: the first corresponded to rapid diffusion in the ferrite phase, and the second was due to the more sluggish diffusion within the austenite. The path toward equilibrium was often indirect; sometimes the ferrite grew first before eventually shrinking to the final equilibrium size, whereas at other temperatures the ferrite initially dissolved before growing at a later stage. The results are compared to the limited available experimental data, and behavior that was found experimentally was accurately reproduced by the computations. The results provide hitherto unavailable data on the kinetics of the equilibration process at elevated temperatures near the solidus temperature and also provide insight into details of the transformation behavior.

Modeling of Ni Diffusion Induced Austenite Formation in Ferritic Stainless Steel Interconnects

Multi-component Phase-Field Simulation of Microstructural Evolution and Elemental Distribution in Fe–Cu–Mn–Ni–Al Alloy

Integrated 3D Modeling Unravels the Measures to Mitigate Nickel Migration in Solid Oxide Fuel/Electrolysis Cells

Mechanical reliability and life prediction of coated metallic interconnects within solid oxide fuel cells

Numerical modeling of diffusion-controlled phase transformations in ternary systems and application to the ferrite/austenite transformation in the Fe-Cr-Ni system

Phase-Field Modeling of Kinetics of Diffusive Phase Transformation in Compositionally-Graded Ni-Based Superalloys

Oxidation behavior of metallic interconnect in solid oxide fuel cell stack

Interdiffusion Across Solid Electrolyte-Electrode Interface

Kinetics and Microstructural Modeling of Isothermal Austenite-to-ferrite Transformation in Fe-C-Mn-Si Steels

First-principles study of chromium diffusion in the ferritic Fe-Cr alloy

Possible connection between nodule development and presence of niobium and/or titanium during short time thermal oxidation of AISI 441 stainless steel in wet atmosphere

Novel coatings for stainless steel interconnects utilized in SOFCs

Dissolution of Interdendritic Σ Phase in Cast Ni–Fe–Cr Alloy

Diffusivity and Atomic Mobility for Fcc Ni-Ti-V Alloys: Experiment and Modeling

Prediction of the Non-Isothermal Austenitization Kinetics of Fe-C-Cr Low Alloy Steels with Lamellar Pearlite Microstructure

Peculiar Roles of Nickel Diffusion in Intermetallic Compound Formation at the Dissimilar Metal Interface of Magnesium to Steel Spot Welds

Cr Diffusion at the FeCr/Cr2O3 Interface: A First-Principles Study

Phase-field modeling of interdiffusion between dissimilar Fe-Cr-Ni alloys during non-isothermal hot isostatic pressing

Effect of Creep of Ferritic Interconnect on Long‐Term Performance of Solid Oxide Fuel Cell Stacks

Mn Diffusion in the Ferritic Fe-25 %cr Alloy: A First-principles Study

Research on Fabrication and Property of NiMn2 O4 Coatings for Fe-Cr Alloy Interconnect Applications