Abstract:Previous studies demonstrate that grain-boundary sliding could accelerate creep rate and give rise to large internal stresses that can lead to damage development, e.g. formation of wedge cracks. The present study provides more insight into the effects of grain-boundary sliding (GBS) on the deformation behaviour of realistic polycrystalline aggregates during creep, through the development of a computational framework which combines: i) the use of interface elements for sliding at grain boundaries, and ii) special triple point (in 2D) or triple line (in 3D) elements to prevent artificial dilation at these locations in the microstructure with iii) a physically-based crystal plasticity constitutive model for time-dependent inelastic deformation of the individual grains. Experimental data at various scales is used to calibrate the framework and compare with model predictions. We pay particular consideration to effects of grain boundary sliding during creep of Type 316 stainless steel, which is used extensively in structural components of the UK fleet of Advanced Gas Cooled Nuclear Reactors (AGRs). It is found that the anisotropic deformation of the grains and the mismatch in crystallographic orientation between neighbouring grains play a significant role in determining the extent of sliding on a given boundary. Their effect on the development of stress within the grains, particularly at triple grain junctions, and the increase in axial stress along transverse boundaries are quantified. The article demonstrates that the magnitude of the stress along the facets is highly-dependent on the crystallographic orientations of the neighbouring grains and the relative amount of sliding. Boundaries, transverse to the applied load tend to carry higher normal stresses of the order of 100-180 MPa, in cases where the neighbouring grains consist of plastically-harder crystallographic orientations. An approach to estimate the amount of sliding as a function of GB particle morphology and diffusive accommodation is developed and employed. The possible implications of these findings on the initiation of creep damage are commented on.

Environmentally Enhanced Creep Crack Growth by Grain Boundary Cavitation under Cyclic Loading

C∗-controlled Creep Crack Growth by Grain Boundary Cavitation

Creep damage and crack initiation behaviour of nickel-base single crystalline superalloys compact tension specimen with a void ahead of crack tip

Creep Behaviors of Nickel-Based Single Crystal Superalloys Compact Tension Specimen at High Temperature

Constraint Effects on Creep Crack Growth

Creep-Fatigue Crack Initiation Simulation of a Modified 12% Cr Steel Based on Grain Boundary Cavitation and Plastic Slip Accumulation

Fatigue Crack Behaviors under Asynchronous Biaxial Loading

Creep crack growth prediction using a damage based approach

Creep Behavior and Life Assessment of Anisotropic Bicrystals with A Void and Without Void in Different Kinds of Grain Boundaries

Experimental investigation on creep strengthening phenomenon of a Ni-based single crystal superalloy under cyclic loading and unloading conditions

Understanding the Small Creep-Fatigue Crack Growth Mechanism of Polycrystalline Alloy Based on Crystal Plasticity and Extended Finite Element Method

Investigation of Macroscopic Brittle Creep Failure Caused by Microcrack Growth Under Step Loading and Unloading in Rocks

A microscopic mechanics model of crack growth with fatigue-creep interaction

A Creep Constitutive Model, Based on Deformation Mechanisms and Its Application to Creep Crack Growth

Crack propagation behavior of different zones in weldment under creep-fatigue loadings

NUMERICAL ANALYSIS OF SURFACE CRACK GROWTH IN PRESSURIZED CYLINDERS UNDER CREEP CONDITION

Evaluation of local stress state due to grain-boundary sliding during creep within a crystal plasticity finite element multi-scale framework

On the Effects of Loading Conditions and Geometry on Time-Dependent Singular Crack Tip Fields

Multi-axial Creep-Fatigue Analysis of a Cracked Groove Structure Subjected to Cyclic Thermal Loading

Experimental Investigation Of In-Plane Constraint And Out-Of-Plane Constraint Effects On Creep Crack Growth

Creep Crack Interaction of High Temperature Structure with Multiple Cracks