Abstract:Creep-fatigue interaction is identified as a primary failure mode for components operating under high temperatures. As operational durations extend, this interaction not only alters the material's microstructures but also initiates a gradual degradation in mechanical properties, significantly impacting its deformation and damage behaviors. In this work, the dynamic microstructural evolution of GH4169 superalloy during creep-fatigue was elucidated via qualitative characterization, and damage level evaluation method was subsequently developed by bridging microstructure degradation to mechanical property degradation. Creep-fatigue tests were performed at 650 °C with various tensile holding times and were interrupted at lifetime fractions of 10 %, 50 % and 80 % for further analysis and tensile evaluations. Results revealed that the prolonged exposure to holding times induced the coarsening of γ″ precipitates alongside an increase in low-angle grain boundaries, culminating a reduction in creep-fatigue strength. The development of voids and cracks exacerbated the degradation of elongation, leading to a hybrid fracture mode encompassing both intergranular and transgranular cracking paths. Synthesizing microstructural evolutions to qualitatively categorize diverse degradation levels imparted a robust physical basis for damage evaluation. A mapping model was established to correlate the average kernel average misorientation (micro-degradation indicator) with the tensile plastic strain energy density (macro-degradation indicator). The damage level evaluation method was endowed with quantitative metrics utilizing this model, and its generality was additionally validated in P92 steel. This work offers an insight into the quantitative damage evaluations of creep-fatigue-induced degradations in materials, thereby providing a theoretical basis for the development of operation management and inspection plans of components.

A Generalized Strain Energy Density Exhaustion Model Allowing for Compressive Hold Effect

A Modified Strain Energy Density Exhaustion Model for Creep–fatigue Life Prediction

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

Creep-fatigue Life Prediction and Interaction Diagram in Nickel-Based GH4169 Superalloy at 650 °C Based on Cycle-by-cycle Concept

A New Life Prediction Model Based on Ductility Exhaustion Theory for High Temperature Low Cycle Fatigue of Turbine Disk Alloys

Fatigue-Creep Interaction Of P92 Steel And Modified Constitutive Modelling For Simulation Of The Responses

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

A New 3D Creep-Fatigue-Elasticity Damage Interaction Diagram Based on the Total Tensile Strain Energy Density Model

Microstructural Damage Mechanics-Based Model for Creep Fracture of 9%cr Steel under Prior Fatigue Loading

A new fatigue life prediction model considering the creep-fatigue interaction effect based on the Walker total strain equation

Oxidation-involved life prediction and damage assessment under generalized creep-fatigue loading conditions based on engineering damage mechanics

A Generalized Energy-Based Fatigue–creep Damage Parameter for Life Prediction of Turbine Disk Alloys

Creep-fatigue Damage Level Evaluation Based on the Relationship Between Microstructural Evolution and Mechanical Property Degradation

Creep‐fatigue Deformation Characteristics and Life Prediction Model of Inconel 718 Superalloy under Hybrid Stress–strain‐controlled Mode

A Modified Microstructure-Based Creep Damage Model for Considering Prior Low Cycle Fatigue Damage Effects

Hybrid-driven Probabilistic Damage Assessment of Creep-Fatigue-oxidation Interaction

A creep damage model for low cycle fatigue based on the equivalent creep stress: Establishment, verification and application

A universal constitutive model for hybrid stress-strain controlled creep-fatigue deformation

An Efficient Fatigue and Creep‐fatigue Life Prediction Method by Using the Hysteresis Energy Density Rate Concept