Abstract:SBA-15 mesoporous molecular sieves modified with copper (Cu-SBA-15) were prepared by pH-adjusting hydrothermal method and characterized by X-ray diffraction, BET, transmission electron microscopy, UV-Vis and (29)Si MAS NMR. The pH of the synthesis gel has a significant effect on the amount and the dispersion of copper on SBA-15. The Cu-SBA-15(4.5) (where 4.5 denotes the pH value of the synthesis gel) modified with highly dispersed copper was used as catalyst for the oxidation of aniline by H2O2. The Cu-SBA-15(4.5) shows a higher catalytic activity compared to CuO on the surface of SBA-15. The influences of reaction conditions, such as initial pH of the aqueous solutions, temperature, as well as the dosages of H2O2 and catalyst were investigated. Under weakly alkaline aqueous solution conditions, the aniline conversion, the H2O2 decomposition and the total organic carbon (TOC) removal could be increased significantly compared to the acid conditions. The percentage of leaching Cu(2+) could be decreased from 45.0% to 3.66% when the initial pH of solution was increased from 5 to 10. The TOC removal could be enhanced with the increases of temperature, H2O2 and catalyst dosage, but the aniline conversion and H2O2 decomposition change slightly with further increasing dosage of catalyst and H2O2. At 343 K and pH 8.0, 100% aniline conversion and 66.9% TOC removal can be achieved under the conditions of 1.0 g/L catalyst and 0.05 mol/L H2O2 after 180 min. Although copper might be slightly leached from catalyst, the homogeneous Cu(2+) contribution to the whole catalytic activity is unimportant, and the highly dispersed copper on SBA-15 plays a dominant role.

Catalytic Wet Oxidation of Aniline over Ru Catalysts Supported on a Modified TiO2

Ruthenium hydroxide supported on activated alumina for catalytic permanganate oxidation of aniline

Catalytic Oxidation of Chlorinated VOCs over Ru/TixSn1-x Catalysts

Ru(III) Catalyzed Permanganate Oxidation of Aniline at Environmentally Relevant Ph.

Roles of Ru on the V2O5–WO3/TiO2 Catalyst for the Simultaneous Purification of NOx and Chlorobenzene: A Dechlorination Promoter and a Redox Inductor

Roles of Ru on the V 2 O 5 –WO 3 /TiO 2 Catalyst for the Simultaneous Purification of NO x and Chlorobenzene: A Dechlorination Promoter and a Redox Inductor

Effects of TiO_2,ZrO_2,and Ti_(0.5)Zr_(0.5)O_2 as Supports on Wet Oxidation Performances of Ru Catalyst

High Activity in Catalytic Oxidation of Benzyl Alcohol with Molecular Oxygen over Carboxylic-Functionalized Carbon Nanofiber-Supported Ruthenium Catalysts

Zn 1.5PW 12O 40 nanotubes catalyzed oxidation of aniline by ozone

Highly Active and Durable Chlorobenzene Oxidation Catalyst via Porous Atomic Layer Coating of Ru on Pt/Al 2 O 3

Catalytic ozonation for effective degradation of aniline by sulfur-doped copper–nickel bimetallic oxide in aqueous solution

Influence of the Structure of TiO 2 , CeO 2 , and CeO 2 -Tio 2 Supports on the Activity of Ru Catalysts in the Catalytic Wet Air Oxidation of Acetic Acid

Catalytic wet peroxide oxidation of aniline in wastewater using copper modified SBA-15 as catalyst

Significant Improvement of Catalytic Performance for Chlorinated Volatile Organic Compound Oxidation over RuOx Supported on Acid-Etched Co3O4

Hydrodeoxygenation of Guaiacol on Ru Catalysts: Influence of TiO2–ZrO2 Composite Oxide Supports

Activity enhancement of Ru/CeO 2 for N-alkylation of amines with alcohols through tailoring metal-support interaction

Highly active and durable chlorobenzene oxidation catalyst via porous atomic layer coating of Ru on Pt/Al2O3

Catalytic oxidation of propane over nanorod-like TiO 2 supported Ru catalysts: Structure-activity dependence and mechanistic insights

Enhanced Catalytic Combustion of Complex VOCs over Ru/Ni-HAP Catalyst: Insights into the Synergic Effects of Ru and Ni Species

Catalytic hydrogenation of aromatic ring over ruthenium nanoparticles supported on α-Al2O3 at room temperature

Treatment of aniline-containing wastewater by electrochemical oxidation using Ti/RuO2 anode: the influence of process parameters and reaction mechanism