Abstract:To prepare anti-fouling and self-cleaning membrane material, a physical blending modification combined with surface grafting modification has been carried out; first, poly (2-hydroxyethyl methacrylate) grafted silica nanoparticles (SiO2-g-PHEMA NPs) were synthesized using surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and used as a blending modifier to fabricate a polyethersulfone (PES)/SiO2-g-PHEMA organic–inorganic membrane by the phase-inversion method. During the membrane formation process, hydrophobic PES segments coagulated immediately to form a membrane matrix, and the hydrophilic SiO2-g-PHEMA NPs migrated spontaneously to the membrane surface in order to reduce interfacial energy, which enhanced the hydrophilicity and anti-fouling properties of the PES/SiO2-g-PHEMA membrane. Importantly, the membrane surface contained abundant PHEMA segments, which provided active sites for further surface functionalization. Subsequently, the carboxyl-terminated fluorocarbon surfactant (fPEG-COOH) composed of hydrophilic polyethyleneglycol segments and low-surface-energy perfluorinated alkyl segments was synthesized via the esterification of fPEG with succinic anhydride. Lastly, the PES/SiO2-g-PHEMA/fPEG membrane was prepared by grafting fPEG-COOH onto surface of the PES/SiO2-g-PHEMA. Thus, a versatile membrane surface with both fouling-resistant and fouling-release properties was acquired. The PES/SiO2-g-PHEMA/fPEG membrane has a large oil–water flux (239.93 L·m−2·h−1), almost 21 times that of PES blank membrane and 2.8 times of the PES/SiO2-g-PHEMA membrane. Compared with the unmodified PES membrane, the flux recovery ratio increased from 45.75% to 90.52%, while the total flux decline ratio decreased drastically from 82.70% to 13.79%, exhibiting outstanding anti-fouling and self-cleaning properties. Moreover, the grafted fPEG segments on the membrane surface show excellent stability due to the presence of stable chemical bonds. The grafted segments remain at the surface of the membrane even after a long shaking treatment. This suggests that this PES/SiO2-g-PHEMA/fPEG membrane material has potential for application in oil/water separation.

New Method for Silica Embedding on a PES Membrane Surface Via in Situ Sol Gel Process and Immobilization in a Polyamide Thin Film Composite

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Engineering High-Effective Antifouling Polyether Sulfone Membrane with P(Peg-Pdms-Kh570)@Sio2 Nanocomposite Via In-Situ Sol-Gel Process

Hydrophilic and Anti-Fouling Polyethersulfone Ultrafiltration Membranes with Poly(2-Hydroxyethyl Methacrylate) Grafted Silica Nanoparticles As Additive

Preparation of Monodispersed Spherical Mesoporous Nanosilica–polyamide Thin Film Composite Reverse Osmosis Membranes Via Interfacial Polymerization

Polypiperazine-amide Nanofiltration Membrane Containing Silica Nanoparticles Prepared by Interfacial Polymerization

In situ ultrathin silica layer formation on polyamide thin-film composite membrane surface for enhanced forward osmosis performances

Novel Polyethersulfone Hybrid Ultrafiltration Membrane Prepared with SiO2-g-(PDMAEMA-co-PDMAPS) and Its Antifouling Performances in Oil-in-water Emulsion Application

Biomimetic Silicification on Membrane Surface for Highly Efficient Treatments of Both Oil-in-Water Emulsion and Protein Wastewater.

In-Situ Sol-Gel Generation of Sio2 Nanoparticles Inside Polyamide Membrane for Enhanced Nanofiltration

Synthesis of thin-film nanocomposite membranes using functionalized silica nanoparticles for water desalination with drastically improved properties

Polyethersulfone composite hollow-fiber membrane prepared by in-situ growth of silica with highly improved oily wastewater separation performance

PES/SiO2 nanocomposite by in situ polymerization: Synthesis, structure, properties, and new applications

Microporous Polyethersulfone Membranes Prepared under the Combined Precipitation Conditions with Non-Solvent Additives

Preparation Of Magnesium Silicate/Polyethersulfone Hybrid Ultrafiltration Membrane For Macromolecular Intercept And Dye Removal

Development of antifouling nanofiltration membranes for separation of dye/salt mixture through incorporation of novel polyelectrolyte-decorated silica

A Novel PES-TiO2 Hollow Fiber Hybrid Membrane Prepared Via Sol-Gel Process Assisted Reverse Thermally Induced Phase Separation (RTIPS) Method

Anti-Fouling and Anti-Bacterial Polyethersulfone Membranes Quaternized from the Additive of Poly(2-Dimethylamino Ethyl Methacrylate) Grafted Sio2 Nanoparticles

Homogeneous Polyethersulfone Hybrid Membranes Prepared with In-Suit Synthesized Magnesium Hydroxide Nanoparticles by Phase Inversion Method

Fabrication of a Modified Polyethersulfone Membrane with Anti-Fouling and Self-Cleaning Properties from SiO2-g-PHEMA NPs for Application in Oil/Water Separation

Polyethersulfone/silica composite membrane for desalination